View Full Version : 63 Falcon NOS lower door hinges

04-19-2012, 05:31 PM
I have left and right NOS lower door hinges for a 63 Falcon. They are painted light blue. $35.00 for the pair.

07-16-2015, 05:10 AM
Any chance hinges are still available?

07-16-2015, 10:30 AM
If they are not, I have some upper and lower hinges in my bin of parts. They are not NOS, but I think I did all new bushings and pins in them. Or have them. I can look at them if you want me to, unless NOS is what you're after.

07-16-2015, 05:28 PM
Purchased the widely available repair kits for both sides and installed them back in 2008. Less than 5,000 miles later the cam plate rivet failed on one side and a cam plate pin on the other side just fell out. Perhaps the kits are junk or my hinges are too far gone to re-rebuild.

Not necessarily seeking NOS hinges.
Interested in what you may have

Thanks in advance,

07-16-2015, 09:40 PM
I'll dig them up and let you know soon.

07-21-2015, 04:50 PM
Re: I have left and right NOS lower door hinges for a 63 Falcon. They are painted light blue. $35.00 for the pair.

#2 in line for 63 Falcon NOS lower door hinges


07-22-2015, 02:52 PM
Still need to dig through bins in my loft to find the ones I have. Went up there the other day and almost passed out; it was probably 120 degrees up there. Might be cooler up there today. I'll try again since I need to pull down stuff for the mini regional anyway - like it or not.

07-24-2015, 09:32 PM
Have been looking for these everywhere and must have sold them at a previous swap meet - or I'm missing a bin somewhere. So far nothing. Sorry 'bout that.

08-07-2015, 04:54 PM
Scored today a pair of lower hinges from the rear doors of a 62 Comet pushin up the daisy's at All American Classics in Vancouver Wa. Also today, learned the hinges Ford installed on Comets were ALMOST identical to their Falcon cousins. There wasn't many to choose from but there are more door hinges out there, perhaps some with correctly placed bolt holes. FYI

11-05-2015, 04:02 PM
do you still have the falcon hinges? Dan 206 355 6544