Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > Blogs

Old

Where Do I Go From Here?

Posted 01-22-2011 at 06:30 PM by MacDee

Okay, it's time for an update...

The last thing I could think of that might be wrong was that maybe the cam timing was off. One of my vanpool co-riders has a couple of vintage Mustangs he's restored. He told me of a time he rebuilt one of his engines, but it "ran like crap!", and he couldn't figure out why. He was sure he had the cam timing was correct when he assembled it, but when he finally gave up and took it to a professional shop, they found the cam timing was off...
MacDee's Avatar
Senior Forum User
Posted in Uncategorized
Views 6496 Comments 1 MacDee is online now Edit Tags
Old

L6 240 Houdini

Posted 01-17-2011 at 11:47 AM by BPVan
Updated 07-13-2011 at 11:37 PM by BPVan

Thanks again for everyone's advice on a machine shop, I should hear back today on the progress of it.

The 240 swap is in full motion. As far as the block I decided to follow up on one I found on CL that was already rebuilt (recently too) as the cost and time was less than fixing the block I have.

I know it is a general rule to replace as many parts as you can as you want to avoid any weak links as well as another teardown in 6 months, however where to draw the line? I...
Attached Thumbnails
Click image for larger version

Name:	New Block 1.jpg
Views:	937
Size:	135.6 KB
ID:	55   Click image for larger version

Name:	New Block 2.jpg
Views:	943
Size:	117.4 KB
ID:	56   Click image for larger version

Name:	New Block 3.jpg
Views:	900
Size:	127.3 KB
ID:	57   Click image for larger version

Name:	New Block 4.jpg
Views:	920
Size:	100.0 KB
ID:	58  
BPVan's Avatar
Senior Forum User
Posted in 240 Build
Views 13206 Comments 10 BPVan is online now Edit Tags
Old

The love of new hardware

Posted 12-31-2010 at 07:31 PM by EdsFunny

So, what I thought would be a fast one day swap of bumpers between the black Falcon and the blue one turned into a three day rust removal extravaganza.

Someone began the restoration of the black one from the top down, meaning good paint and re-chromed bumpers. I decided the blue one deserved them, and I justified the theft with some clean up work on the wiring and rust under the black one.

I'm a fanatic for new hardware - I think it's from my airplane mechanic background,...
Attached Thumbnails
Click image for larger version

Name:	oldbolts.jpg
Views:	831
Size:	202.3 KB
ID:	52   Click image for larger version

Name:	newbolts.jpg
Views:	803
Size:	200.8 KB
ID:	53   Click image for larger version

Name:	swap1.jpg
Views:	801
Size:	228.7 KB
ID:	54  
EdsFunny's Avatar
Active Forum User
Posted in Uncategorized
Views 5902 Comments 2 EdsFunny is online now Edit Tags
Old

And away we go!

Posted 12-13-2010 at 10:43 PM by Jeff W
Updated 12-13-2010 at 10:43 PM by Jeff W (update)

Should have it back in six to eight weeks. Then the work starts.

The picture in primer is after boatloads of work. I am really happy with the quality of work and time they are spending on this. They even removed the doors to jam it properly. Guide coat is on and final block sand.
Attached Thumbnails
Click image for larger version

Name:	IMG_6609.JPG
Views:	880
Size:	83.7 KB
ID:	48   Click image for larger version

Name:	IMG_0681.JPG
Views:	858
Size:	60.2 KB
ID:	51  
Jeff W's Avatar
Super Moderator
Posted in Uncategorized
Views 6485 Comments 2 Jeff W is online now Edit Tags
Old

More EFI Fun

Posted 11-28-2010 at 08:05 PM by pbrown

The fuel pump finally arrived. It's been on back-order since August. It bolted in right where the old one was. I worked on some of the plumbing at the rear.

I still have a bit of hard line to finish with up front. I want to get the car a little higher to make that section easier to access.

I tested the new idle air control (IAC) valve. It fits and works fine. I did some testing. I installed the IAC in the throttle body. Then I set my retract settings to one and the start...
pbrown's Avatar
Administrator
Posted in 62 Falcon, EFI
Views 2312 Comments 0 pbrown is online now Edit Tags

All times are GMT -7. The time now is 09:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.