Simpler Times

Printable View

January 24th, 2007, 10:01 PM
Jeff W

Simpler Times

I sometimes take for granted how easy the Falcon is to work on. My daily driver is a '96 Ford Aerostar. My alternator went out today and I referenced my Chilton manual for removal. Can you believe step #2 instructs me remove the front right wheel! I don't think this will be a 30 minute project.

I long for the good old days.
January 24th, 2007, 11:15 PM
redfalken

I have vowed to never change the plugs again on our `96 Ranger. 4-cylinder with eight plugs and I had to use every ratchet extension, swivel socket I had and even a magnet! It probably took me a couple of hours.
January 25th, 2007, 08:48 PM
Dan

I Feel your pain

Quote:

Originally Posted by Jeff W

I sometimes take for granted how easy the Falcon is to work on. My daily driver is a '96 Ford Aerostar. My alternator went out today and I referenced my Chilton manual for removal. Can you believe step #2 instructs me remove the front right wheel! I don't think this will be a 30 minute project.

I long for the good old days.

My 40/mpg Honda is down and I've been driven the Falcon (not happy 'bout that). But at least I can work on my Falcon and is usually cheap fix(compared to todays prices) and everything is right there in plain sight and easly accessable. Thats why I love the old cars http://rainierfalcons.com/forums/ima...ons/icon10.gif. Well that and a few other reasons---They acttuallly had some stying then. Today most look like gumdrops.

DANhttp://rainierfalcons.com/forums/images/icons/icon7.gif
January 25th, 2007, 08:57 PM
Dan

spark plugs

Quote:

Originally Posted by redfalken

I have vowed to never change the plugs again on our `96 Ranger. 4-cylinder with eight plugs and I had to use every ratchet extension, swivel socket I had and even a magnet! It probably took me a couple of hours.

My SHO Taurus was like that, I could not get last 3 plugs. :bicker: However, as hard as that was just try changeing plugs on a v-12 Jaguar. You have to get really deep into it(removeale of many major compopnents). What should only take a little time turns into whole day feasco!
I LOVE MY OLD CARS!
February 2nd, 2007, 07:43 AM
Luva65wagon

Quote:

Originally Posted by Jeff W

I sometimes take for granted how easy the Falcon is to work on. My daily driver is a '96 Ford Aerostar. My alternator went out today and I referenced my Chilton manual for removal. Can you believe step #2 instructs me remove the front right wheel! I don't think this will be a 30 minute project.

I long for the good old days.

I agree... I have a 93 Aerostar and though I don't know why they'd want you to remove the front wheel, I know I had to do that to get to the spark plugs on the rear half on both sides. Pretty direct access then, though. Cars these days are put together from the inside out it seems. On two cars that I've needed to change a heater core on (a Sable and a Ranger) you had to remove the entire steering column and dash to get to it. No wonder they wanted $800+ just for labor on these things!
March 1st, 2007, 07:52 PM
Sedanman

This is why I've been driving with very little heat in my '96 tracer for 2 winters now - replacing the heater core involves removing the entire dashboard unit!