-
Rear end options?
Has anyone swap an 8.8" rear axle into a Falcon? I am looking at this or a nine inch. All I am concerned with is the width. The rest is all custom fab work, ie 4 link with air bags. I think if I measured correctly I need 58" WMS to WMS. I know a 9" from a early Bronco will work but they are priced like gold. So I was thinking a rear from a exploder?? Thanks for the help guys. Steve H.:confused:
-
What year car? The 60-63 Falcon/Ranchero used a 56" wheel to wheel spacing. You can cut that down to 55" and still use the factory leaf springs. That is what I did.
There is a local chassis shop that can cut down a housing for you. Maybe Kenny can fill us in on who he used.
You'll probably need to do some welding anyway if your doing a four link.
-
Here is a Falcon 4 link kit. Someone on FordMuscle.com installed one. It looks good.
http://www.heidts.com/boltin_rear_4_...e_package.html
-
Here's the place I used to narrow my housing:
Ron Pircey Race Cars
253-815-0652
37205 Pacific Hwy S
Federal Way
Did a good job, it was done on time, cost $150, and he seemed like a nice guy.
-
Nice setup. I like the kit and the price. I wonder if I can get it without coil-overs and run the air bags I want?? Thanks for the link. Steve