Hello everyone H2 crown vic disc brakes

Newbi here, live in stockton not far from you
>
i'm getting ready to redo my 63 conv, current stats ( 6cyl, 4 spd, 4 lug )
>
i bought a ranchero for swapping over parts ( cammed 289, C4, frt granada disc brakes)
>
other parts acquired ( maverick 8" rear, 4 spd toploader )
>
I have 2 questions=
>
1. what parts are need to convert the maverick rear to disc brakes? i read about crown vic's being a good source? is there a tutorial and parts list for this swap?
>
2. what tranny would you put in the C4 or Toploader, I know its a personal preference thing but everyone here has years of experience and has probably gone from one to the other.
>
thanks gang:BEER:, lou

There is a website or there was about converting an 8" to disc brakes using the crown Vic. It's been while since I've looked at it and I don't know if it still exists.. Google crown vic swap see what comes up..

BUT....
I've done this swap so i can walk you through it if need be.. In fact..
here's a link to a thread with some directions
http://tffn.net/phpBB3/viewtopic.php...+Vic+disc+swap

If you have questions let me know..

Nathan

Grab the e-brake cables and I'll explain how to use your stock e-brake set-up and combine the two different cars to have a stock appearing working e-brake..

You'll need to make a trip to the hardware store.. for the spacer washers and for the e-brake cables..

for the spacers i believe i used 1 1/8 galvanised washers and a hole saw and made my own spacers.. cost me $2

For the e-brake cable buy some cable stops..
Cut the e-brake cable to length and add a new stop..

I'll take pictures and explain later..

Nathan