1964 Ranchero turn signal cam

I went to replace the old steering wheel with a new grant 3 spoke wood wheel. I went to put the cam on the new grant adapter and the diameter was slightly larger.....my efforts resulted in me breaking the metal cam.
I'm now convinced I have the wrong adapter #3249 but I should have figured that out before I broke the dang cam.

So once I figure out the correct adapter number and get one here I will need to find a replacement cam.

Hopefully there is one out there as I don't thing these are re popped. Or, it there are other options that would be great.

Hal

Hal,

Are you talking about the metal clip with post that cancels the turn signals?

If so, I have one in my tool box. I believe its of a 62 or something

Yep, the metal circular clip that cancels the the blinker. I broke one end off but it appears still fit on the old wheel. So I think when it get the correct adapter for the grant wheel it will work. I did find a couple on eBay and might pick on of those up just to make sure.
I'm not sure if the 62 model is the same. Thanks for looking Nathan.

Hal