Well, here's the latest. Things are going together pretty well now that all the hard stuff is done. Still have a bit to do, but shoudln't be an issue getting it done in time for the show. May have to upgrade my charging system though... :WHATTHE:
http://i5.photobucket.com/albums/y15.../th_audio1.jpg
Here's a picture of the new 1/0 gauge wire installed to feed to the amps. I've got yet to install the 1/0 gauge grounds, but they are made up.
http://i5.photobucket.com/albums/y15...th_dynamat.jpg
Here's where the 1/0 gauge snakes into the car... just behind the shifter hump. The other wires in the hump will connect to the back-up light switch if it ever comes in time. The orange wire coiled up are speaker wires. Dynamat is installed front to rear, but I did that years ago. Want a quiet car? That's what you need to do.
http://i5.photobucket.com/albums/y15...th_alpines.jpg
Here's the amps installed and all wired up. I think if you look close to the left and the right of the picture you'll see the new retractable seat belts I added. They j u s t fit between the panels and the seat base.
http://i5.photobucket.com/albums/y15..._interior1.jpg
Just a shot of what the interior is like today.
http://i5.photobucket.com/albums/y15...on/th_sub1.jpg
This is the temporary sub panel. They want (gulp) $1500 to do the mirror image of the spare tire cover, so that's going to have to wait for maybe a very long time. This one cost me $8 and one hour of time.
http://i5.photobucket.com/albums/y15...on/th_sub2.jpg
Just sitting there for the picture. The paint to match the vinyl doesn't exist, so I used three different colors and made it work. You can kind'a see the front panel just ahead of the wheel well.
And there's more to come...