Search:

I have a '62 four door and I'm trying to set up the windshield fluid sprayer system the way it originally worked with the manual foot pedal. I think I have nearly everything except the cap to the red...

Thanks all for helping me, first for helping me understand the importance of such an upgrade, and second, for adding your expertise in making it happen. A big shout out to Kenny for not only doing...

Hi All,

Glad to hear some of you can make it the Tech Day this Sunday (3/8). As I hate to post my address online, how about this, my house is between 77th and 80th NW (actually only one block) in...

Hi All,

After talking with Kenny (who lives a couple of blocks from me in Ballard) I would like to suggest March 8th as a Tech Day to install a Dual Master Cylinder in my '62 4-door. It's a...

So I'm gearing up to do this master cylinder job and I'm wondering if there is any time I could come over and look through your box of brake fittings? I can meet whenever it's convenient for you. ...

Thanks Roger and Pat,

I was able to find the little sprayers at that Pick and Pull lot down in Vancouver. Couple of questions, do the spayers have a rubber tip as I see some advertised but...

Okay, I've got a new question... I have a 62 4-door 3-speed that has never had the windshield washer option installed. I know I need the reservoir bag (red), bag bracket, hoses, and a t-valve and as...

Thanks Patrick!

I have a commitment at 6P every evening for the next two weeks, but is it possible to come by between 5 and 6 any day before you leave? I'm not sure what time you get home from...

Hi All,


Below is the parts list from the Comet article linked on the master cylindar web site. Does this look right? The NAPA store I went to had problems finding the right fittings based on...

I should probably add this to the master cylinder thread but I'll ask here as this is where I initially started...

I have the master cylinder ('67 Mustang) from Schucks and I went to NAPA to get...

Thanks everyone,

So... finally I think I have an answer. As I now could get the car started I took it up to Acme on Aurora to have them check out the generator among other stuff. They...

Hi All,

I thought I'd give you an update. I did install the new starter and ugh, still the same no go and the grinding noise persist. I then noticed that with the headlights on, they would go...

Hi All,

Thanks for your suggestions. Just as a quick update, Kenny did come over and helped me replace the solenoid and that didn't work (it generated the same whirring grinding sound as before)...

I live on Jones and 77th NW. Actually very close to Kenny as well. Who, by the by, ever so nicely has agreed to come over and give a listen...

Thanks guys,

The solenoid appears to bolted firmly and the battery terminals are really clean. If I were to purchase a replacement, what exactly do I ask for and where is a good local place to...

Hi All,

I'm brand new to the forum (and car novice) and in a way of introducing myself, I need help!

I have a 62 4-door Falcon (of course) and just lately I can't get it started. It was...