Before you give up there is one more resource I thought of. That is if he is still in business. Ron Boesl at NW Classic Falcons might be able to find the parts and/or at least tell you exactly what...
Type: Posts; User: Jerry Kirby
Before you give up there is one more resource I thought of. That is if he is still in business. Ron Boesl at NW Classic Falcons might be able to find the parts and/or at least tell you exactly what...
I have attached a picture.There is no gap. The guy at TFFN probably did mean the strip that goes the length of the drip rail or he could have meant the short trim piece that is horizontal although I...
Actually I said at the end of the channel, being dyslexic I was looking down the channel from the rear of the car. If I could figure out how to send a picture it would have made it clearer. Anyhow it...
I looked at my 65 HDTP and there is a piece of stainless that fits on the end of the channel. You must be missing those two ends. I took pictures but don't know how to attach them to the message. If...
Thanks Roger. June would not be good for me. I have to have some serious "tech time" with a couple of doctors to overhaul my cardiovascular system but anytime after June would be absolutely...
I would greatly appreciate any help at all. The hood and seat and a couple other things are definetly two man jobs. I also would like to get the exhaust system in and could use any ideas on that I...
I also would like to go on the list for a tech day. I have lots of little (and some large) things to do but for right now would like to get the car running and street worthy. My list of things...
Hi Joe,
We replaced the front glass which I bought and had installed by Glass Doctor. We re-sealed the rear glass and installed it ourselves. I bought the seal kits from Dearborn. They are good...
Hi Roger,
Just curious, how did the swap meet sale go? Did the club get rich? when you get a chance.
Jerry
PS. Thanks for all your efforts
Hi Bill,
Just got back from Reno last night and just read your request to borrow the fender roller and you are more than welcome to it. I live in Spanaway and will be around most of the day...
Hi Joe,
The place was Dearborn Classics Phone 800-252-7427
Part # SVB100 and the price was $26 but that was about 3 years ago. Check them out on the net @ Dearbornclassics.com
Jerry
You can buy a nice shiny new one from Dearborn, at least you could three years ago when i got the one that replaced what Roger has. It would probably cost more to have it chromed than buy a new one....
Actually I did run them in the sill trough (just didn't know what you called it) What is even more of a suprise, miracle whatever everything works. Also got the heater all wired up and it sure is...
I have pictures from the shop manual that might help. When I did mine we pulled all the wires to rear on the floor down the driver side. Just as they were routed originally.There were originally a...
Just a reminder. I have a fender roller tool. Works good. If some of you remember it worked OK on my '65. I will loan it no charge to any regular member that has a need for it.
[thumb]
Jerry...
I am way behind on this answer, but I found that the 3M stuff is great by you could use duct seal which is an electrical product. It comes in 1# slugs and is around $4. I bought mine at Ace Hardware...
I would like to pay my dues by check. Who do I mail it to?
Jerry Kirby
I am a little slow in responding. Have been out of action for a while. I had my grill powdercoated silver on my '65 work in progress. I don't think it looks all that bad. Roger has seen it and...
Thor,
Maybe a dumb idea but have you thought about having it done? The guy that built my engine is Dave Bliss at 253-847-2742. He is in Spanaway, does great work and I am sure he would do all or...
I hope the car at least met your expectations. Is there a chance I could come out to Buckley and see it one of these days? I am still interested in seeing how they did the r&p front end.
Jerry
John,
I go because I live down here and it is the one chance a year I get to drink a brew and swap lies with my ex brother-in-law. He drives his '38 convertible up from Portland. I still...
Anyone going?? Because it is almost in my backyard I will be there the 24 or 25th or both.
Jerry Kirby
'65 Futura
Have done a little but is not on road yet. Thanks for asking.
Jerry
Hal,
I have a brand new set of black kick panels I bought for my '65 but went another way. You can have them for your new dream car if needed.
Jerry
Hal that is a hung dinger. I can't wait to see it. Let us know when the boat docks. Anxious to see how they did the power r @ p.
Jerry Kirby