Just so you know in case you don't you will have to take the windshield and back glass out to do the headliner right .
Type: Posts; User: Ranchero_65
Just so you know in case you don't you will have to take the windshield and back glass out to do the headliner right .
Do you have a Preimer Auto glass around ? I got a new windshield for my Ranchero from them for $147.00 just last year ..
I thought I would still have problems with flexing /twisting . They didn't look strong enough to me . I'm sure I won't have any problems like that now .
I made my own. Pic's on my web sight .
Looks good from here Pat .
I have a PM from Pat but I can't get to it . I get the same error message when I go to PM's ..
Pat if you see this hope all is ok there this can wait .....
Database errorThe Rainier Falcons > The FalconForum database has encountered a problem.Please try the following:
Load the page again by clicking the Refresh button in your web browser.
Open the...
Some things I will not be using . Buyer pays shipping if shipped .
http://roseburg.craigslist.org/pts/826493233.html
Thanks for the pic's Roger . I was planning on being there but still out of work .. :( recovering from my heart ordeal in Feb ..
Give this place a call .
http://www.falconparts.com/
Kareena,
Lift the hood and look on the driver side where the fender bolts hold the fender on; you should see a section in the fender lip that has been removed to allow you to see where the body...
I used a center and a drift punch when I did mine . Hit them with the center punch first then drift punch to flatten them .
Hey Roger your not the only one this happens to .... :)
Hopefully I'll be over my heart ordeal and be able to make it to Salem and meet some of ya'll ..[thumb]
Pat Thanks for your kind offer but I have a QT that will be here Mon. I found that Caswell Plating has it for $38 a QT . I feel that by brushing it on I wouldn't have to tape up as much as I would by...
Pat, When you did your motor did it take a full QT to do it ? I can get it local but in spray can and not sure I want to do it that way. Any tips ?
Thanks .
Hey that looks like a Falcon from down under .... lol
Jerry how much you want for them ? Any pic's ?
I couldn't find any for my 65 so I just made my own . Wasn't that bad to make.
BlackFalcon , Sorry I haven't gotten back sooner went to North Carolina for a couple weeks. If the Sealer you got is self leveling just lay a bead and let it do it's thing. I have found the warmer...
It is a seam sealer, self leveling . Autobody store will have it I like the Fusor brand .
Hal , Look at the top of the sterring box and you will see a sloted stud with a lock nut . Lossen the nut and take a screw driver and turn the stud clockwise a little at the time and re tighten the...
Pbrown wrote, "Go back to the main menu and click on Technical Articles on the left side menu"
Me no see ....:bicker:
Dho ,,,, Main menu as in home page .. I see it .:shift:
HI Dan , Nice looking ride. You say the vinyl top is orginial ?
Ain't the block sanding Fun ???? ....................... NOT !!!!!
Looking better ...