Search:

Iwould like to take the seat tracks apart to inspect and clean them. Does any one know how to take them apart?


Thanks
Frank

Here is a Dynomax YouTube video that covers their models.

https://www.youtube.com/watch?v=ORGyLVmFqmY

On my 63 Convertible the Circuit Breaker located between the ignition and headlight switches and is bolted the the bottom of the dash lip. It was a Phillip's head machine screw with a nut on the...

Do you know what rpm 60mph is? Does it vibrate at that rpm in neutral? If it does not that may eliminate the engine, trans, and clutch.

Is this a new problem or did it show up after some repair...

I got my Falcon on the road recently. After taking a few short trips I decided I need a cup holder. So this is what I came up.

For any one interested the Cool Car Cruise at the Kitsap Mall happened last Tuesday. Lots of cars showed up and were parked in every other space. There were maybe 300 cars. People were mostly...

I have a complete 6 cylinder and c4 I pulled from my car this winter. PM if you what more details.
Frank

I didn't see anyone talk about the "weather strip" that runs across the top of the radiator support. When I first got my Falcon I was talking with a long time Falcon Sprint owner. He cautioned me...

Last year I bought a used blasting unit that was made out of plywood. It works remarkable well. It turns out it was a kit and the company is still around for parts. The first blast media I got was...

Here is what I did when installing Mustang 2 front suspension. I built a steering column support that replaced the rubber gasket. I traced the gasket mounting clamp on some sheet metal. My the...

Steve, one of the main machine shops in the peninsula area is Westbay. Their machine shop is located in Bremerton on Navy Yard HWY. They have been around a long time. If you go to the shop they...

I though about that. Once the differential is installed I will check the angles. With the 4 link rear suspension I should be able to adjust the angle of the pinion to get it in spec.

I got the new engine and AOD installed today (second attempt). The AOD is a very tight fit at the transmission mount and frame. The passenger side hits the frame reinforcement and there is only...

The mods to my car are going to include the installation of an AOD. I test fitted the AOD today. It looks like it fits with little or no modifications, I won't know for sure until the engine and...

Matt, I am in Port Orchard you are more then welcome to come over to see what progress I have made on my Falcon. I am installing a Mustang II front end and a 4 link rear end. PM me if you are...

Have you considered the Mustang 2 front suspension? TCI's is about 3K. You remove the existing suspension and weld on a new substructure, components including disk brakes, rack and pinion steering...

I started in December with the the removal of the engine and transmission. Then removed the front suspension and installed a Mustang 2 front suspension. That gives me modern suspension with power...

I am new to Falcons. We purchased a Futura Convertible in early summer and used to in several local car shows. The car was originally a 6 cylinder with a 4 speed. The previous owner replaced the 4...