Search:

Yeah if you add the 2.77 bell I have and the c-4 bell
I really do have a collection.. The c-4 was orginally behind the 250ci..

So I have a C-4 trans and another 2.77 trans laying around..
I...

Well I thought I found gold only to get home and find out that I'm one part number off.. I found a C5TA-6394-A which is from a Truck with a 302..(needs to be c5aa-6394-a)
I pulled the bell and...

I've been told that a p/n c5aa-6394-b will work..
Basiclly any 157 or 10" 6bolt bell will work..

I need to have a garage sale.. too many falcon parts..

When is the monroe swap meet??...

I'm agreeing with you there.. so e-bay here comes another d1ta-6394-aa..
If I could find a 250 bell I'd be all over it like stink on ****.. I'll keep searching..

Thanks for the Ford six link.....

Boy the Maverick forums has lots of good info..

The bell was used in a truck or 351C cars
It is a 164 tooth bell which allows me to use a 164 tooth flywheel (new search) but also allows me to...

I wonder if Speedway has a universal pull style slave..

It seems that t-5 bells are easier to find than the older stuff.
I could build a hydraulic clutch using a pull slave and be shifting in...

I need to do more research..

The Bell I have is a D1TA-6394-AA which according to David Kee is a 351 Bell but I find lots (the majority) of the ebay bells are the same part number and they have...

I prefer my local O'reilly. Only because I'm a manager at one..:doh:
atleast thats how I feel after work sometimes..

My friend jeff said add hydraulic to his 64 wasn't that difficult. but then...

I could.. I've been toying with the idea of hydraulic clutch..

But in the mean time I was thinking of using the z-bar system.. but I need to check if the 250 block has the boss for the pivot of...

Ok I found a flywheel...

Now I need a bell housing.. The one I have might not work.. I have a D1TE-6394-aa which fits a 351 but looks to be a truck bell which is too deep..

Any body know...

Pat,
yes I can use a SBF flywheel had to do a little more research but I havent gotten anyone to tell me no I can't.. So I can use a zero balance flywheel..

I found one on E-bay for a fair...

Hello,

Yes I'm at it again.. I wanted more performance but wanted to keep the six so I'm building a neat little 250ci motor..

I've long rodded the engine with connecting rods from a 2.5L Ford...