View Single Post
  #3  
Old 08-30-2017, 10:25 AM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,349
Blog Entries: 4
Another thing you need to consider here is the type of brakes the aluminium MC will have been working with, and it's internals. External size/fitment and weight is the least of your concerns. Most OE aluminium MC/s will likely have been designed for power brakes and front or all-4 disc brakes, so even if you could get it to fit - the braking may be horrific.

More likely you will find aftermarket M/C's (via Summit, Jeg's, Speedway Motors) which are aluminium and setup to replace the single stage Falcon M/C with a safer dual setup.

I don't shop at Speedway much, but looking there they have a nice "selection system" to help you. Look on the left side of the page - here:

http://www.speedwaymotors.com/shop/m...14-3-477-30478
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear
63.5 Hardtop (previously MacDee's "Freddie")
powered by: Classic Inlines 200-6 | C4 | 7.25 rear


Reply With Quote