Update pics

[BadBird]

Yeah, I noticed they didn't go in the forum but they showed as being sent. Just thought it was a glitch some how. Larry

[BadBird]

Got back from 3 months in Tucson. Sorry I missed the meeting on Wednesday but my health issues didn't improve at all in the heat of Arizona. Did enjoy 3 months with only one day of sprinkles though.
While down there I got my hood hinges chrome plated where my brother has taken all my other parts. Showed the owner pictures of my car and he now has a bunch of them posted on his wall in the office.
I originally powder coated the hinges and they looked Okay but decided to go with chrome and I think they look better.
Drilled out all the shoulder rivets, installed bolts, spacers, and nylon washers. Will re-install the hood later when I get some help lifting the hood.

Still got quite a bit to go to finish this car and finding out where the oil leak is coming from is my priority. Nice to be back and really looking forward to getting to the tech days and helping out with the club. Larry

[BadBird]

Here are a couple pics of the hinges.

[Luva65wagon]

Those look awesome! That car is awesome. I can't wait to see it driving up the road at a show.

[Jeff W]

I want to see this in person also. When is the target "coming out" show?

[BadBird]

Wish I knew. Been having as many as three of these head pain seizures a day so it limits the amount of time I get to work on this thing. I still am working on things that don't involve laying down so it takes time. Car is entered in Hot August Nights so it's imperative it's done and test driven enough to verify worthiness to drive in the parade. Sure wanted to be ready for the Everett show but, too late for that one. Oh well. Too many good things going on in life for me to keep whining about a few negatives. So many people out there that have it so much worse.

[BadBird]

Getting closer and closer. I drove the car in the cul-de-sac and kept hearing a clunking noise and after a few hours we decided it might be the posi-trac rear end making some noise so I put some additive for posi's that I didn't know was required. Drove it back around a few times and then around a few blocks. Started getting louder and felt like it might be towards the front. Babied it home and checked the front end. Don't laugh yet it gets better. I found three missing lug nuts on the L/H wheel with the other two on by one thread. Fixed that, drove it around and sounded Okay so took it down to Les Schwad and they did the alingment.

They drove it around for a while and then on my way home about three blocks away it ran out of gas (gauge shows 1/4). When the car was rolling to a stop I heard a clank clank noise and found the L/H rear wheel mag cap held on with just one screw banging against the wheel.

Pulled the car home, put in some gas, will get more screws and thanks to GOD all these things happened at the times and places they did. I was one thread away from the front end dropping on the pavement. If the car wouldn't have run out of gas I wouldn't have heard the wheel cap rattling and would have lost it and I was close to home when I ran out of gas.

Only a few small things left on my finishing list but after this day I know I need to do a lot more checking before I go very far or very fast. Larry

[BadBird]

Finally got a little more work done. I finished the installation of the L/H Rocker Molding. Got the R/H door lower seal fitting holder trimmed to clear the sill plate. Got both sill plates and the carpet is all installed now.
Finalized the installation of the hood interior panels. I like the look but they are too heavy so I will be looking at something else for that area. But not now. I have to use a board to hold the trunk open. Can't live with that.

[redfalken]

I plan on restoring my trunk this summer but nothing that fancy! Nice work. Should that trunk light be turned 180 degrees? I've got one under the hood and have the opening so you don't see it when it's open.

[Jeff W]

I have seen some pictures of Falcon trunks where a gas shock cylinder from a hatchback was installed to hold the lid open... Nice little bracket may look nice.

[BadBird]

Kenny, about the light direction. I will have to check it again but I believe it has a device that turns it on when the trunk is open and if I remember correctly it didn't work the other way. I would rather it pointed down though so I will double check. Thanks and if you need help doing your trunk let me know.
Jeff, I have some of those support rods that I came off the storage doors of my motorhome. I thought about those but didn't want to screw around with drilling through the fiberglas. I also saw several cars in Reno last year that were using chrome plated expanding rods to hold their trunks open in the winds, so that was on my list also. Thanks guys.
Larry

[BillP 98201]

Nice trunk work!!!!! Thats lots of bass!!!!!

[BadBird]

Took off the hood today and installed the liner. It was intended to be a one piece installation but after laying it in place I decided it would look better filling in the triangular areas of the hood instead with the yellow in between. I love the look and still have a little trimming to get it fine tuned. I thnk I will remove the fiberglas panels that I put on the trunk lid and install this same material back there. It will also save on weight.

I drove the car around today and the oil leak is fixed. Now I need to concentrate on a noise when I hit a bump. I noticed a dent in one of the shocks today and I will take that one out and see if the noise goes away. Gas gauge isn't working so have to decipher that little issue. But other than that it is running great, sounds good and have gotten a lot of thumbs up reactions just in the few miles I've driven it.

Now hopefully the weather cooperates so I can get it to the Maltby and Greenwood show. Registered for both. Larry

[BadBird]

My friend/neighbor Randy welded my traction bars for me and I got them installed this morning. They are like the ones he used in drag racing and I like the looks. Just have to be careful with clearances now.

Enjoyed the Greenwood car show and watching people. Every kink imaginable in Seattle. Looking forward to the next show now. Larry

[Luva65wagon]

Very nice Larry. Yeah, watch those speed-bumps and raccoons.

Liked the term "kink" - that fits.