Windshield and one side (fixed) window installed.
The windshield rubber (Dennis Carpenter USA) fit and function was perfect.
The side window seal was made in Thailand and was not so perfect. The slots that the trim is inserted into stopped short on both ends by about 1". We did the best we could to open it up with a razor, but I still had to grind a bit off of the little tang that inserts into he rubber seal slot.
We did have a small problem with the lower Windshield stainless trim wanting to migrate out of the slot during install. We finally just went for it and used a rubber mallet to lightly tap it back home. If there is a trick, I'm all ears.
Reply With Quote
Bookmarks