65 dash bezel restoration

**BadBird** · November 29th, 2012, 11:26 PM

I got my 64 dash parts rechromed by a company in Pennsylvania. They were not cheap, over $300. There are quite a few places on the internet that I see, but most did not repaint the black areas. You can see mine here in the pics. The one pic is before I sent them off. If you want I will try and find their name. Larry

**pbrown** · November 30th, 2012, 09:15 AM

http://www.shineonmetrim.com/

**TechBoss** · July 11th, 2013, 07:43 AM

What is the best method for removing these dash pieces? On the piece surrounding the stereo, I've removed the two screws, but it seems to be attached on the lower half still from behind. Any suggestions would be appreciated.

**Voodoofalcon** · July 11th, 2013, 08:50 AM

Originally Posted by TechBoss

What is the best method for removing these dash pieces? On the piece surrounding the stereo, I've removed the two screws, but it seems to be attached on the lower half still from behind. Any suggestions would be appreciated.

On my 65 dash there are 2 tabs on the left side that stick under the gauge panel assembly. So you have to loosen the gauge panel assembly and then you can slip
It out.