You should get it to bare metal and put a coat of epoxy on. Then add undercoating.
You should get it to bare metal and put a coat of epoxy on. Then add undercoating.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
And as I mentioned to you previously via email -- weld up some sub-frame connectors for it! Stiffen that baby up. I'll help fabricate them for you!
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Bookmarks