Results 1 to 15 of 26

Thread: Monroe Swap Meet

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2006
    Location
    Woodinville, WA
    Posts
    451

    Monroe Swap Meet

    What days were the Monroe swap meet? I don't have my notes from the March 2013 meeting and can't remember....
    I believe I will be able to do a shift at the booth this year!
    Gary MacDonald
    ROGER's...
    EX... '63 Hardtop
    Had...
    Scarebird front discs
    200 w/ CI alum head
    C4

  2. #2
    May 18/19 are the public dates. We'll probably not setup until Saturday, but I may go on Friday just because I can. Others who want to go on Friday can, but we have to use the Vendor pass to get it.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  3. #3
    Jeff and I are carpooling for a Saturday shift. Maybe Brian too?

    And we talked about possibly getting a Falcon parked in our space. If you weren't at the meeting Weds., we have a corner shaped space that looks pretty large. At least on the map. We could probably park a car to get attention and still have room for the 10' X 10' awning and a couple of 6' tables for parts.

    So...any volunteers to show off there ride? I personally think it would be cool to display a fairly stock time capsule if we can. But I'm sure anything old and shiny will attract attention. Roger...your wagon's pretty stock but I know you're also hauling parts.

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  4. #4
    Join Date
    Feb 2007
    Location
    Fredrickson
    Posts
    977
    My calendar shows me available for the entire week-end, and one of my specialties is to hold down a chair. I'll cover at least one day.

    There probably aren't too many cars more representative of the Falcon than yours, Kenny.


    Gene Smith
    Fredrickson, WA
    '65 Ranchero Deluxe
    302, EFI, 4-Spd
    Granada Discs

  5. #5
    I'll be there probably all three days. But Sunday will be my manning the booth day assuming the weather is good and we stay. Will be there in the booth Saturday too for any of you who want to trek out into the yard. Hopefully will find anything I want to get on Friday and get that out of my system.

    I will likely be bringing other cars to the corral too, so probably can't bring the wagon for the booth.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  6. #6
    Join Date
    Nov 2010
    Location
    Seattle
    Posts
    300
    I'm for Saturday in but I will need to leave by noon. I wouldn't mind walking the grounds early for an hour then I can help at the booth.
    Brian
    '67 Falcon Bus/240/C4/Offy DP/MSD Duraspark II/Holley 4160

  7. #7
    Quote Originally Posted by SmithKid View Post
    There probably aren't too many cars more representative of the Falcon than yours, Kenny.
    Mine's beginning to be a 20-footer with 14 years on the bodywork and paint job...and no garage. I'll bring it if no one else steps up. That might give me a chance to get some detailing done while you're entertaining the crowd!

    But...anyone out there with a nice survivor or stock restoration, please feel free to volunteer and show off your ride.

    Where's Curt? He's got a beautifully restored `69. Here's a shot from the 2005 Nationals. We drove to San Rafael in a caravan. Really nice guy but I haven't seen him in several years.
    Attached Images Attached Images

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  8. #8
    Quote Originally Posted by redfalken View Post
    Where's Curt? He's got a beautifully restored `69. Here's a shot from the 2005 Nationals. We drove to San Rafael in a caravan. Really nice guy but I haven't seen him in several years.
    That's a '67, not a '69 Kenny. Unless he put '67 front fenders on a '69. The little "scallops" on the fenders were a '67 only thing.

    I would like to help at the swap meet too. I should be availible most, if not all weekend. Jon
    Jonathon Hass
    Stanwood, WA.
    '68 Falcon Sports Coupe

Similar Threads

  1. Monroe Swap Meet 10/6 10/7
    By philnlucky in forum Events and Announcements
    Replies: 5
    Last Post: October 3rd, 2012, 03:52 PM
  2. Monroe Swap Meet - May 13, 14, 15
    By Luva65wagon in forum Events and Announcements
    Replies: 50
    Last Post: May 27th, 2011, 02:55 PM
  3. Monroe Swap meet
    By doghows in forum Chit Chat
    Replies: 10
    Last Post: October 15th, 2010, 07:09 PM
  4. 2010 Monroe Swap Meet
    By Luva65wagon in forum Events and Announcements
    Replies: 41
    Last Post: May 17th, 2010, 09:28 PM
  5. Monroe Swap Meet
    By Luva65wagon in forum Events and Announcements
    Replies: 39
    Last Post: May 18th, 2009, 07:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •