Results 1 to 4 of 4

Thread: Another project 64

  1. #1

    Another project 64

    So I listed this 64 Comet in my signature, now to show off a picture. Got my Grenada disc breaks, and duel master cylinder installed. Spent many hours drilling the spot rivets out to fix my fresh air vent leaks, and then removed part of the floor pans, and thinking while the floor is cut out, might be a good time to install some sub-frame connectors.
    Attached Images Attached Images
    Phil N

    1964 Falcon Futura
    1964 Comet Cyclone
    1965 Comet Cyclone
    1966 Chevelle, oops wrong forum.

  2. #2
    Sounds like you're doing it right! If I ever paint my Falcon again I will do so much more body repair than I did the first time. Taking the cowl off is a lot of work but the only way to get in their and fix it right.


    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  3. #3
    Join Date
    Aug 2009
    Location
    Sequim
    Posts
    2,112
    Boy do I know that!!!! But the paint has started to fly!?!

  4. #4
    Yep, been there, done that.

    I still think they should make a removable upper cowl panel so we only need to "cut the lid off" and then screw on a new upper panel after you clean it out and repair it down below. This would be OK, I suppose, if the bottom wasn't too bad, but by the time most of us have been there, doing that, there wasn't much left on the lower part to repair. Like Steve, most of the rot was on the lower part.

    Anyway, good luck! Show as many pictures as you like. We all like to watch things happen. Like seeing paint on a certain sedan delivery.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Similar Threads

  1. Anyone need a project? Or maybe 500?!
    By redfalken in forum Chit Chat
    Replies: 2
    Last Post: May 2nd, 2013, 09:38 PM
  2. My while I am at it project
    By cmefly in forum Tech Talk
    Replies: 4
    Last Post: May 15th, 2012, 10:45 AM
  3. The project begins...
    By DSHAMEK in forum Introductions
    Replies: 10
    Last Post: September 12th, 2011, 04:47 PM
  4. Ranchero project
    By doghows in forum Show Off Your Ride
    Replies: 6
    Last Post: March 17th, 2010, 05:18 PM
  5. Project car: 63 convertible
    By 63vert in forum Tech Talk
    Replies: 7
    Last Post: July 27th, 2007, 12:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •