Does anyone know if a roller lifter can be removed with out taking off the cyl. head? I did this motor in 99 and don't remember if I put the lifters in after the heads were on not. they are much taller than a flat tappet type...thanks..jh
Does anyone know if a roller lifter can be removed with out taking off the cyl. head? I did this motor in 99 and don't remember if I put the lifters in after the heads were on not. they are much taller than a flat tappet type...thanks..jh
You probably have about 1/2" more than a regular lifter to play with. Having just put in mine it's pretty fresh in my head. Though I didn't measure it.![]()
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
It depends. OEM roller lifters will come out with heads in place but it is tight. Link-bar style lifters will not.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
Bookmarks