Monroe swap meet

**Gina K** · February 8th, 2014, 01:34 PM

Is the Monroe Swap Meet April 13th? Is the club going to have a spot like last year? Ild like to bring some parts and also help out this year.

**Luva65wagon** · February 8th, 2014, 10:23 PM

Mid May (17-18). Yes, I mailed in the paperwork and we'll be in the same spot as last year. And yes, you can bring stuff to sell. We typically try to bring the gooder stuff we each have, though I'm bringing a lot to either give away or disperse to the winds.

**Gina K** · February 9th, 2014, 10:37 AM

Thanks for the info, what I saw was in Monroe, Mi, oops.I have odds and ends to sell or pass on but mostly I have grills. They take up so much space and I have no need for them. Looking for Comet literature now especially S-22 specific.

**falcon cobra** · February 11th, 2014, 07:15 AM

gina, what year grills do you have and are they any good? I hope they are not BBQ grills...thanks...jh

**Gina K** · February 12th, 2014, 10:08 AM

Hi jh,
I don't really know how to rate what kind shape they are in....they are "bran-used" not brand new. I have 60,61,62,63,64,&65.

**falcon cobra** · February 12th, 2014, 02:01 PM

Maybe you could take a picture of the 62 and 63 for me ? and I would think if they are not good you wouldn't take them to the swap meet. I dont care about the finish as long as they are somewhat straight,

thats the hard part is to try to make them straight, the alum. is quite thin as you know.. what would you be asking for them? thanks...jh

**Gina K** · February 12th, 2014, 03:22 PM

Opsss I got two 62s and no 63.sorry😪

**Jeff W** · March 20th, 2014, 01:44 PM

Gary, will you be around on Saturday morning to modify your banner brackets to fit the new tent? I will bring some couplers and another length of pipe. You bring your slide rule and stress charts.

**MacDee** · March 21st, 2014, 02:50 PM

I hope to be there! I can't remember how we rigged the sign last year, but I'm sure we can figure it out again.

Stress Charts?

Do you have the Modulus of Elasticity for the couplers and pipe?

I'll bring a slide rule and maybe we can SELL IT!

**helomech** · April 22nd, 2014, 04:06 PM

So since I'm new here, what's the Monroe swap meet? Is it a classic car thing? Ford thing? Falcon thing? or just a thing thing?

I have a couple of grilles which are 64-65 ish. Probably better just for filling in the space for someone who has no grille until they find a nice one or spend the time on these. 64 tail lights (haven't looked closely at them yet). What appears to be a 65-66 Mustang rear seat in a lovely red... bleh!

Is this a long ways from Puyallup? I guess I COULD google it....

**redfalken** · April 22nd, 2014, 07:37 PM

The Monroe Swap Meet is north of Seattle in the Skagit County Fairgrounds. They have one in the spring and one in the fall. Mostly vintage automotive parts, some vendors with reproduction parts, rechromed bumpers, hubcaps, etc. Some motorcycle stuff, and some garage sale stuff.

The Rainier Falcons have had a booth there for...5 years?? We do sell parts to make money for the club but we also use it for recruitment and a place to hang out!