Shelby drop

[Nathan289]

Shelby drop while improving steering geometry usually lowers the car another 1/2 inch or so.

What spindles are you using?

What exactly are you experiencing? Bump steer, or just poor handling. .

[doghows]

Chasing it right now. I installed a bump steer eliminator kit because my tie rods were angled upwards at normal height.
Low speed around town fine, up to 50mph fine but over that the car feels like it's grabbing the road, darts around.
I ordered one inch drop coils from global west so those will go in, then I want to do the Shelby drop. After that it's off to the alignment shop were I'll ge the "performance" alignment done. I got the specs off of daze cars web site.
I guess we'll see from there.
Got any hing else I should look at? Everything was replaced during the rebuild and I think my issues might be lowering it as much as I did. Now it has settled quite a bit,so I get a lot bump stop contact as well.