Old Car Safety

[ew1usnr]

Dennis, This bracket really should be turned around and bent upward at about a 45 degree angle.

Hello, Roger.

I cannot turn it around because the strap from the waist belt and the back of the seat are in the way. I understand, though, what you are saying about angling the bracket to decrease the twisting leverage.

I looked back at where I bought the flat belt anchor
Seatbelt anchors.jpg

and see that they also have an angled one (on right).
0e540337_mount-hardware640x480.jpg

I do not have a bench vice and even if I had one this anchor may be hard to bend. It is, after all, deliberately made to be difficult to bend. It might be easier to just buy a set of the angled ones.

See: http://www.racereadyproducts.com/har...ting-hardware/