Results 1 to 5 of 5

Thread: Looking for a repair shop in central Florida

  1. #1

    Looking for a repair shop in central Florida

    Now that the falcon runs great, the next order of business is the transmission. It's a 4 speed manual that chatters and it also leaks pretty bad so I always have to top it off. I'm looking for a repair shop in central Florida to handle it. I live in Sanford specifically but If I can find a shop here or even lake Mary, longwood, Orlando or apopka that would be great. Thanks for any suggestions!

  2. #2
    What type of 4-speed is in this? What engine?

    If this is the 6-cyl English 4-speed (Dagenham) the shaft seals for this, and gaskets, are a hard find. Ask me how I know. Most shops can do very little with these because parts are so hard to find. I've seen a gasket kit, I think, on eBay, but they wanted more than I wanted to pay, so I made my own gaskets, which is easy to do. The shaft seals I addressed by sandwiching an o-ring between the seal and the shift lever before bolting those back on. There is a tail-shaft seal you can still get, but that is the only easy item to find on these. They are made of unobtainium. I had to buy 5 or 6 of these to get enough good parts to build one good transmission, though I probably have enough parts to build another. Once I sell my wagon, which has this transmission, these spare parts are going on eBay to pay for all of my future projects combined.

    If a V8 4-speed you are in better luck and most good transmission shops in your area can deal with these. Parts are more plentiful. Maybe Dennis, who lives in Florida, knows a good transmission shop. Otherwise ask around some of the local car clubs, since they usually know who (locally) to use and who to avoid.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  3. #3
    Yep, it's the dagenham

  4. #4
    Got any other recommendations?

  5. #5
    Buy low, sell high... that's always a good recommendation.

    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Similar Threads

  1. Rust repair 68 Futura
    By Ryanandlydia0604 in forum Tech Talk
    Replies: 1
    Last Post: August 10th, 2015, 09:47 PM
  2. Autobody Repair
    By Layla1973 in forum Local Resources
    Replies: 3
    Last Post: February 11th, 2015, 12:41 PM
  3. Rust Repair!
    By ew1usnr in forum Tech Talk
    Replies: 41
    Last Post: January 23rd, 2014, 05:12 PM
  4. 1964 Futura brake repair
    By abergford in forum Tech Talk
    Replies: 6
    Last Post: July 26th, 2013, 04:06 PM
  5. Grille repair
    By Dan in forum Tech Talk
    Replies: 5
    Last Post: February 21st, 2007, 10:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •