Worked On 65 Ranchero Today

[Jerry Alfaro]

Hi Jerry, what set-up are you using for the conversion to disc?

Jeff,

Here is the kit that I purchased. It comes supplied with everything you need to convert your Falcon from drum brakes to disks.

Rotors
Hubs
Calipers/pads
Spindle to Calipers brackets
Master Cylinder
Proportioning Valve
Brake lines
All needed bearings /seals/bolts/dust caps

It's a nice kit. $900 because I picked it up locally.

http://www.mpbrakes.com/products/pro...isc_brakes.cfm

jerry-

[Jerry Alfaro]

Jeff,

Here is the kit that I purchased. It comes supplied with everything you need to convert your Falcon from drum brakes to disks.

Rotors
Hubs
Calipers/pads
Spindle to Calipers brackets
Master Cylinder
Proportioning Valve
Brake lines
All needed bearings /seals/bolts/dust caps

It's a nice kit. $900 because I picked it up locally.

http://www.mpbrakes.com/products/pro...isc_brakes.cfm

jerry-

Since I'm going to be doing a disk brake conversion I decided to purchase new upper/lower arms complete with ball joints. I will also buy new tie rod ends to complete the front conversion to disk brakes. Should stop good!

jerry-