Not sure why the suspension picture came out sideways. That is the upper control arms dropped an inch, moved rearward 1/2" and bronze bushed spring seats. The brakes are some original V8 hubs and spindles with 12" 90 Supra rotors and Mazda 323 calipers and brackets I made from 1/4" steel plates. That's the biggest that will clear a 15" TorqueThrust wheel. The 4 piston Mazda RX7 aluminum calipers i had when i built that setup for my 64 Fairlane in 1990 cleared the steel wheels but were not even close to fitting with the TorqThrust.