Dash Knob Removal

[Cutman]

Thanks guys... I will try tomorrow. If I get hung up I was post again. Take care,
Rob

[Cutman]

Thanks for the info guys...
All your info was right on. One thing I found that helped a bunch was removing the dash speaker grill and acesss the backs of the knobs through there. Not having the proper tool... the very pointed needle nose pliers worked like a charm. With all the knobs removed I had time to cut out and weld up the ign. hole (my ignition is now on the tilt column).
Thanks so much...
Rob

[amasterj]

I am going to be doing the same thing very soon, this is very useful!