Yours may be a bit different; mine dosen't have "Falcon" on it. I think it's the same piece, though. I took a picture of the fender when it was off. You can see the attach points as well as the shape of the trim piece:
http://i35.photobucket.com/albums/d1.../FenderBig.jpg

The fender is not that difficult to remove. There's a row of fasteners along the upper edge, under the edge of the hood, an attachment to a brace at the lower forward corner, and three or four along the rear edge, one of which is accessible after you remove the kick panel in the interior.

Good luck! Keep us posted on your progress.