Hi All,
Below is the parts list from the Comet article linked on the master cylindar web site. Does this look right? The NAPA store I went to had problems finding the right fittings based on this list. Patrick I live in Ballard too, maybe I could stop by for a few moments next weekend and look at the fitting you have, is that possible? Finally, after talking with Kenny hopefully we can do this project in late August, maybe 8/23...
Thanks!!!!!
Parts Required: (prices are based upon a visit to my local NAPA store 7-31-06)
•
1967 Mustang Duel Bowl Manual Master Cylinder for front and rear drum brakes
(remanufactured). Note: This conversion will not work with a stock power brake
booster. $19.95
Core Charge $9.25
•
Brass Brake Line Tee Fitting (1960-66) $2.99
•
Brass Brake Line Tee Fitting w/1/8” female pipe thread (1960-64 only) $5.69
•
8” - 3/16” Brake lines with fittings on each end (1960-66) $1.99
•
8” - 3/16” Brake lines with fittings on each end (1960-64 only) $1.99
•
1 Quart of Type 3 Brake Fluid $3.87
•
Master cylinder brake bleeding kit. $1.00
Optional Parts:
(might as well replace them well it is apart)
•
Brake Light Switch $10.99
Bookmarks