I was looking at Kenny's link to his rear end swap and noticed the information where he changed out the brake parts. Kenny mentioned that he wanted to powder coat some parts and because of time and money issues he painted them with paint instead. I wanted to powder coat my boat trailer and looked into costs. It would have cost me $1150 to get 6 rails coated so I purchased all of the equipment myself. I bought a used oven for baking small parts, an infra-red heat light (highest cost item) so I could bake large parts, laser thermometer, the powder coat gun and several colors. Now I am using all the equipment on my Falcon. So.... I am not looking to get into a business and I am very busy with my car and work but if any of you have a few small parts you want coated let me know. Remember I am not a professional but I can post a picture with some of the parts I've done. The photos with the chrome looking parts don't show up as shiny as they are in person. All of the parts in the rear end photo are powdercoated except for the third member. The housing, springs, and I also coated the brake drum in high temp silver. I also have a sand blast cabinet and can blast small parts. Larry
Reply With Quote
Bookmarks