Stripping RANCHERO for parts ,have extra parts hood ,fenders ,rear window ,chrome trim ,steering column and more .located in WEST COVINA <Ca91790
Stripping RANCHERO for parts ,have extra parts hood ,fenders ,rear window ,chrome trim ,steering column and more .located in WEST COVINA <Ca91790
Last edited by woodstocka1; November 17th, 2013 at 07:28 PM.
Where are you located? You can click on the "Quick Links" menu above and select "Edit Your Details" to add city/state information to your profile. Then it will show up on your posts.
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Still might be interested in the bed trim if you have it... PM me if so.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Roger I need to check but I think I have some new bed trim in my latest acquisition.. But I might be coaxed into using some substandard stuff and powder it...Let me know if you work out a deal on this stuff or not..
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Steve, I'll get in that line if Roger isn't interested. Downside is that my corner pieces have a hole where a pop-rivet existed for a tonneau snap. We might even get a seat involved if I get to the front of the line.
Last edited by SmithKid; November 18th, 2013 at 05:25 PM.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Is all the trim the same. 63-65? I'll dig it out tomorrow.
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Looks like I might have 2 sets of that trim.. I have 2 sets of the stuff that goes around the window, at least one set of the bed rail, 2 corners I found so far, and one tailgate piece. Maybe between what I have and your guys stuff we can make 2 good sets and one mediocre set I can powder??
I check it all out real good this weekend, most of this trim was wrapped up in newspaper. Looks very polish-able however.
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Give Gene first dibs on the good stuff. And he does have a VERY NICE bench seat available if you want to make the interior blue. I would if I could.
Mine is not too bad if I keep wax on it. The widow part is chrome, so to powder coat it you'd need to strip the chrome first, right? No need to powder coat stainless... it's stainless.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Ok I'll get a good look at what I have and go from there.
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Hi woodstocka1, do you have the passenger side door lock and retainer clip?, if so I'm interested in buying it.
Thanks,
George
I'm pretty sure Ido ,Where are you located ? I'm located in West Covina Ca
I'm in San Juan Bautista, Ca., right next to Salinas and Monterey, Ca.
Thanks woodstocka1,
I'll get that money in the mail to you tomorrow, Thanks for your help.
GermanGeorge
Bookmarks