Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > General Forums > Tech Talk

Reply
 
Thread Tools Display Modes
  #1  
Old 08-03-2014, 09:27 AM
ew1usnr's Avatar
ew1usnr ew1usnr is offline
Senior Forum User
 
Join Date: Dec 2012
Posts: 841
Near disaster!

I took my car to a shop yesterday to have the oil changed and the tires rotated. While I was driving the car this morning I heard some odd sounds and noticed a shimmy while making made a right turn. I took the car home and looked underneath. The suspension looked fine. I pulled the wheel cover off the left rear wheel and .......

.... found loose lug nuts.

1 lug nuts.jpg

The other wheels look OK, but this one was a shade away from being a major problem.

2 lug nuts.jpg

I used my bumper jack to lift the car up to re-position and tighten down the wheel, and didn't take me long to decide that the bumper jack is completely useless. It wobbles so much on its base that the least bit of ground angle causes it to lean and collapse. I left it out of the trunk and replaced it with a scissor jack that I had bought.
__________________
Dennis Pierson
Tampa, FL
"The Wonder Falcon"

'63 Futura Hardtop (260, Ford-O-Matic, bench seat)

Last edited by ew1usnr; 08-04-2014 at 02:18 AM.
Reply With Quote
  #2  
Old 08-03-2014, 10:44 AM
Jeff W's Avatar
Jeff W Jeff W is offline
Super Moderator
 
Join Date: Oct 2006
Location: Seattle
Posts: 1,319
Blog Entries: 3
I'm glad you knew the clunks and groans of your car enough to notice an unusual sound, and then did some immediate exploration to find the source.

I just brought my Honda to the shop for some A/C work and in talking with the mechanic about how much more complex modern cars are compared to those of just a few years ago, the topic of carburetors came up. He said he doesn't understand them and has never worked on one... and he is a Honda Certified Technician.

My point is, not every mechanic can be an expert at every system, but you certainly expect them to know how to tighten a nut. Sounds like it may be time to find a new shop or at least find out who did the work so you can be sure to brig it in on his/her day off.
__________________

Jeff Watson
Seattle, WA
'63 Tudor Wagon (170 - 3 spd.)

Last edited by Jeff W; 08-03-2014 at 10:25 PM.
Reply With Quote
  #3  
Old 08-03-2014, 08:18 PM
redfalken's Avatar
redfalken redfalken is offline
Administrator
 
Join Date: Sep 2006
Location: Seattle
Posts: 1,612
Blog Entries: 5
Time for a new mechanic! If I ever have someone work on my car (classic or modern) I almost always loosen and use a torque wrench to put the lug nuts to spec when I get home.

Especially with disc brakes. I've heard those pneumatic wrenches can distort the disc if overtightened.
__________________

Kenny Likins
Ballard, Seattle, WA
www.redfalken.com

`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.