Does anyone know if the center link for a 1965 Mustang 6 cylinder (Manual steering) will work on a 1964 Falcon? I'm guessing no, since the Mustang part is so much cheaper - but they sure look the same in the interweb pics! (I know)
Does anyone know if the center link for a 1965 Mustang 6 cylinder (Manual steering) will work on a 1964 Falcon? I'm guessing no, since the Mustang part is so much cheaper - but they sure look the same in the interweb pics! (I know)
I know on the v8 cars no..
I imagine the I6 cars would be a no as well.. but its a guess.
Nathan and Jen Cooper
63 Sprint Hardtop "Dollora"
63 Super deluxe squire wagon "Mayble"
* this spot is vacant for future project*
I'm pretty sure the Mustang is a bit wider than the Falcon between the frame rails. But the Falcon w/6 used the same center link 60-65 as shown here:
http://www.falconparts.com/ford-falc...NKS-17p520.htm
This isn't so on the V8 models as shown here:
http://www.falconparts.com/ford-falc...ersion-d19.htm
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Thanks for the replies, gents. I ponied up for the Falcon part. Should arrive tomorrow.
Bookmarks