Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Worked On 65 Ranchero Today

  1. #1

    Worked On 65 Ranchero Today

    My son and I worked on the 65 Ranchero again today. After his sudden impact with a semi-truck a few weeks back it's starting to look better. We now have the replacement hood and drivers sided fender cleaned and painted on the underside/inside. We spent a long time pressure washing and sanding two layers of paint from the driver side inter-fender area and A-arms area and painted. Had to order the front fender rear splash shield because the old one was really bad. I did get new front splash shields so I can at least get that on tomorrow. The new radiator came early this week so It will get mounted as soon as I put the final paint on the radiator mount. Attached are a few pictures.

    jerry-
    Attached Images Attached Images

  2. #2
    Nice work Jerry! It's always rewarding to get things cleaned up with a fresh coat of paint. Where are you located? It looks dry and sunny...

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  3. #3
    Quote Originally Posted by redfalken View Post
    Nice work Jerry! It's always rewarding to get things cleaned up with a fresh coat of paint. Where are you located? It looks dry and sunny...
    I live in the SF Bay Area in a town called Livermore, East of SF. It got up to about 68 degrees yesterday and is supposed to be this warm all the way to Thanksgiving. Chris has the Ranchero already out in the sun this morning to get it warmed up for painting. After we get the Ranchero on the road again I'll be looking at getting a disk brake kit to install. When I do the disk brakes I'll rebuild the upper and lower A-arms with new bushings and ball joints. I plan to box them in to make them stronger. I'm also toying with the idea of relocating the upper A-Arms to lower the the car. I have a line on a complete 9" 'N' rear end that I will narrow to fit the car as I have the kit/tools used for narrowing rear ends. We want this car to be an everyday driver. Who knows, I just my look at putting a new FI 5.0 in it one day.

    Do you know anyone who has put a 5sp Tremmic in a 65 Falcon or Ranchero? My Ranchero is an original 4-speed car.

    Gotta go, suns out and I'm burning daylight that can be spent on the Ranchero.

    jerry-

  4. #4
    Quote Originally Posted by Jerry Alfaro View Post
    Do you know anyone who has put a 5sp Tremmic in a 65 Falcon or Ranchero? My Ranchero is an original 4-speed car.

    Gotta go, suns out and I'm burning daylight that can be spent on the Ranchero.

    jerry-
    Well, we got more done today. Got the front Radiator in paint, installed the fan, new radiator, cleaned/painted and installed headlight bucket this morning. We mounted the replacement fender with just the front splash shield to see how much adjustment will be needed and the fender will have to go back a bit more. Also found out that I will need to tig weld the fender nut that secures the bottom of the fender that is under the rear of the fender. I'll do that when I install the back splash shield while the fender is off again. Also got the hood latch all cleaned painted and installed. The hood fits real snug after making the final adjustments. Monday I'll work on getting the bumper mounted so the turn indicators work and it can be driven around.

    Attached are few pictures from today.

    jerry-
    Attached Images Attached Images

  5. #5
    Quote Originally Posted by Jerry Alfaro View Post
    Do you know anyone who has put a 5sp Tremmic in a 65 Falcon or Ranchero? My Ranchero is an original 4-speed car.
    Are you referring to a T5 or a 3550/TKO? The T5 is a popular swap. Find a Chevy S10 T5 tailhousing and swap it onto a T5z tranny to get the shifter to come through at close to a stock location. You can use the longer T5 but the shifter will be farther back and will intersect with the floor support crossmember.

    The TKO style will also fit but the shifter box hits the crossmember mentioned earlier. I saw a mod where the stock brace was "C" notched in the upper corners to provide clearance. The TKO has three shifter locations to choose from.

    The TKO500 would be a good choice for high performance engines. Most can get by with a T5.

    Here are some useful links:
    http://www.moderndriveline.com/
    http://www.darkhorseperformance.com/
    Patrick Brown
    331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI


  6. #6
    Quote Originally Posted by pbrown View Post
    Are you referring to a T5 or a 3550/TKO? The T5 is a popular swap. Find a Chevy S10 T5 tailhousing and swap it onto a T5z tranny to get the shifter to come through at close to a stock location. You can use the longer T5 but the shifter will be farther back and will intersect with the floor support crossmember.

    The TKO style will also fit but the shifter box hits the crossmember mentioned earlier. I saw a mod where the stock brace was "C" notched in the upper corners to provide clearance. The TKO has three shifter locations to choose from.

    The TKO500 would be a good choice for high performance engines. Most can get by with a T5.

    Here are some useful links:
    http://www.moderndriveline.com/
    http://www.darkhorseperformance.com/

    Thanks for the info. I'll be looking into doing this once I complete this assembly project and install disk brakes. Worked on it again today, installed the headlights a bumper after I took out some dents. I cleaned the turn signals and painted the brackets that hold them in place. I need to clean up some wiring that the guy who owned the car that did a pretty poor job.

    jerry-

    Thanks again.
    jerry-

  7. #7
    Quote Originally Posted by Jerry Alfaro View Post
    My son and I worked on the 65 Ranchero again today. After his sudden impact with a semi-truck a few weeks back it's starting to look better. We now have the replacement hood and drivers sided fender cleaned and painted on the underside/inside. We spent a long time pressure washing and sanding two layers of paint from the driver side inter-fender area and A-arms area and painted. Had to order the front fender rear splash shield because the old one was really bad. I did get new front splash shields so I can at least get that on tomorrow. The new radiator came early this week so It will get mounted as soon as I put the final paint on the radiator mount. Attached are a few pictures.

    jerry-
    My son and I haven't worked on the Ranchero much do to the rainy weather here in the Bay Area. Hope to get back working on it when the weather isn't so nasty.
    jerry-

  8. #8
    Hey I just picked up my disk brake conversion for my son's 65 Ranchero yesterday. The kit comes with everything to convert the drum brakes to disks. As soon as I finish remodeling the wife's bathroom I'll start on the conversion. I also will be converting the stock rear drums to 11" x 3" after I put rear disks on my friends 69 Mustang. He's going to give the the 11" x 3" drums from his Stang. Woo Hoo! The Ranchero will have bigger brakes than my 66 GT-350H. Aren't I a nice Dad?

    I'll lay everything out an take a picture to post.

    jerry-

  9. #9
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    Hi Jerry, what set-up are you using for the conversion to disc?

  10. #10
    Quote Originally Posted by Jeff W View Post
    Hi Jerry, what set-up are you using for the conversion to disc?
    Jeff,

    Here is the kit that I purchased. It comes supplied with everything you need to convert your Falcon from drum brakes to disks.

    Rotors
    Hubs
    Calipers/pads
    Spindle to Calipers brackets
    Master Cylinder
    Proportioning Valve
    Brake lines
    All needed bearings /seals/bolts/dust caps

    It's a nice kit. $900 because I picked it up locally.

    http://www.mpbrakes.com/products/pro...isc_brakes.cfm

    jerry-

  11. #11
    Quote Originally Posted by Jerry Alfaro View Post
    Jeff,

    Here is the kit that I purchased. It comes supplied with everything you need to convert your Falcon from drum brakes to disks.

    Rotors
    Hubs
    Calipers/pads
    Spindle to Calipers brackets
    Master Cylinder
    Proportioning Valve
    Brake lines
    All needed bearings /seals/bolts/dust caps

    It's a nice kit. $900 because I picked it up locally.

    http://www.mpbrakes.com/products/pro...isc_brakes.cfm

    jerry-

    Since I'm going to be doing a disk brake conversion I decided to purchase new upper/lower arms complete with ball joints. I will also buy new tie rod ends to complete the front conversion to disk brakes. Should stop good!

    jerry-

  12. #12
    Well, we finally have all the parts needed for converting our 65 Ranchero to disk brakes. I started today on the conversion by removing the entire front suspension. I made a metal template for drilling holes to relocate the upper a-arms. I worked real good for drilling the holes in the exact location. I stamped the template with the information so if I need to make a new template, all the information is there. My son and I will be working on it the entire weekend so hopefully I'll have pictures of the complete conversion. Here are few from today.

    jerry-
    Attached Images Attached Images

  13. #13

    Saturday's Work

    Quote Originally Posted by Jerry Alfaro View Post
    Well, we finally have all the parts needed for converting our 65 Ranchero to disk brakes. I started today on the conversion by removing the entire front suspension. I made a metal template for drilling holes to relocate the upper a-arms. I worked real good for drilling the holes in the exact location. I stamped the template with the information so if I need to make a new template, all the information is there. My son and I will be working on it the entire weekend so hopefully I'll have pictures of the complete conversion. Here are few from today.

    jerry-
    Got both sides installed today and only have the new tie rod ends, new brake lines, proportioning valve and master cylinder to install. Should have them completed by Sunday

    jerry-
    Attached Images Attached Images
    GT-350H

  14. #14
    Looks like things are really coming together Jerry! Nice work. I checked out the MP Brakes website and they seem like a good deal compared to some of the other set-ups I've seen. Give us a review once you've had a chance to evaluate.

    And that's a nice template you made for relocating the a-arms!

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  15. #15
    Quote Originally Posted by redfalken View Post
    Looks like things are really coming together Jerry! Nice work. I checked out the MP Brakes website and they seem like a good deal compared to some of the other set-ups I've seen. Give us a review once you've had a chance to evaluate.

    And that's a nice template you made for relocating the a-arms!

    Redfalcon,

    I went out this morning thinking I was going to install the duel resivor master cylinder.... The kit only gives you one adapter fitting for connecting brake lines, right... The brake lines on the Ranchero are 3/16" and the fittings for the new master cylinder are for 5/16" lines. I tried every auto parts store in my town and no one has any fittings. There is a shop open on Monday that carries Airequip fittings and I know he has the correct fittings I need to adapt to the 3/16" line. I was hoping to have the Ranchero driving today. Dang...

    The template worked great for making the correct hole locations for drilling.

    So far all the parts in the kit fit except I had to grind the passenger side caliper to clear the rotor, it was mostly flashing. All in all everything has fit good. When I'm all done I will write a summary of the complete install.

    jerry-
    GT-350H

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •