![]() |
#1
|
|||
|
|||
Tire fitment '67 Falcon
I kind of figure I am probably on my own here, but I will throw it out there anyway. I am putting a modified '71 4v Cleveland in my '67 falcon, want to run 17" wheels, so I can run Toyo Proxes TQ drag radials on the back. Everything I hear is that the Toyos are about the only drag radial out there that really works well in the rain, not that we get much of that here in the beautiful PNW.
![]() I would like to try to fit a 235 45 17 on the front on a 17x8 4.5" bs bullit wheel. I want to use Mustang Steves kit and run the 13" late model Mustang GT rotors on the front with a Shelby drop and cut 600lb per inch coils. I am a-ok rolling the fender lips, and it will probably be necessary. Anyone running this on the front of a '66-'69 Falcon? I know it will fit on the front of a '64/'66 mustang with the fender lips rolled, and I figure the later falcon has a similar amount of room up front, but I figured I would ask if anyone has done this? Last edited by falcongeorge; August 30th, 2017 at 09:46 PM. |
#2
|
||||
|
||||
__________________
Roger Moore 63 "Flarechero" powered by: '65 289-V8 | T5 | 8" TracLoc rear |
#3
|
|||
|
|||
![]() |
#4
|
||||
|
||||
True - that's why here they are called "the forgotten Falcon."
Good news is that you have way more room to work with (in most places) than those of us with the 60-65 models.
__________________
Roger Moore 63 "Flarechero" powered by: '65 289-V8 | T5 | 8" TracLoc rear |
#5
|
|||
|
|||
I have a '65 as well, yes, HUGE difference. I previously had an FE in the '67, 28x10.5 ET streets on 15x8 4" bs fit with a small trim at the leading edge, and everywhere else they cleared with room to spare. I wouldn't even try to fit those on the '65 without some serious work.
|
#6
|
|||
|
|||
well, there wasn't much doubt in my mind, but it looks like 235 45 17's will fit on the front of a '66-'69 falcon with a bit of room left over.
http://blog.macsautoparts.com/1967-5...-4-door-sedan/ ![]() and no, I have no intention of putting a mustang wing on mine. ![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tire size | Bill Pierce | Tech Talk | 10 | January 17th, 2017 01:52 PM |
13 inch Falcon four lug spare wheel and tire, and starter motor | Wilbur | Cars and Parts For Sale or Trade | 0 | September 4th, 2015 07:10 PM |
13 inch four lug Falcon wheel & tire for sale | Wilbur | Cars and Parts For Sale or Trade | 0 | June 12th, 2015 03:11 AM |
Tire size...61 | dhbfaster | Tech Talk | 21 | October 15th, 2014 12:39 PM |
67 falcon trunk tire/jack decal | phila | Parts Wanted | 0 | January 1st, 2008 02:11 AM |