Don't forget Clifford performance as another source for speed parts..
Classic inlines makes an aftermarket aluminum cylinder head for the small sixes.. very cool and a little pricey.. $1500..
I would find a better cam, not too big though..
Go .030 on the pistons..
Mill the head .030 to compensate for the thicker head gasket..
Find a cylinder head from a 78 or so 200 or 250. These heads have the largest intake log, and the largest valves plus it should have hardend exhaust valve seats.
Get a header and upgrade the carb..
Nathan
Last edited by Nathan289; March 26th, 2009 at 10:41 PM.
Reason: forgot a step
Nathan and Jen Cooper
63 Sprint Hardtop "Dollora"
63 Super deluxe squire wagon "Mayble"
* this spot is vacant for future project*
Bookmarks