Hey guys,
Im thinking I saw this covered, but cant find it. What parts do you need to convert the fuel filler to the inside of the trunk? Thanks
Hey guys,
Im thinking I saw this covered, but cant find it. What parts do you need to convert the fuel filler to the inside of the trunk? Thanks
Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.
Bill,
Look for the filler neck out of a 67-72 Ford Pickup and then fab a bracket to hold it upright, though the hose will hold it too temporarily. I think if you search Patrick's threads he has a photo of his in a thread from a couple years ago. If I find it, I'll post a link here. I know Kenny and now Joanna both have the same conversion done.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Bill,
Here's the pictures from Patrick's car:
http://www.rainierfalcons.com/forums...5&postcount=24
Of course Patrick's is very custom, but you can do it without chroming the tube first.
I think both Patrick and Kenny used Mustang tanks as well, which have a straight filler neck on the tank, but Kenny did Joanna's at the last tech day without changing tanks.
Last edited by Luva65wagon; February 17th, 2010 at 09:52 PM.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Here's a thread that has some photos and good info including the cap to buy so it's not venting into the trunk..very important!
http://www.rainierfalcons.com/forums...ghlight=filler
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Thanks Roger and Kenny. Now I have to figure out how to fab it....lol
Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.
Hey Roger do ya still have it?lolHey all,
Just thought I'd mention that I picked up a pick-up filler tube when I was at the Pull-a-Part this last weekend. Paid $1 for it. Will sell it for $2. It's all cleaned up and ready to go.
__________________
Roger
Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.
Bill,
I had two of them (I seem to snatch them if they exist when I'm scrounging though the Pull-a-Part), but one went into Joanna's car at the last tech day and someone who was there (can't recall who) asked for the other one. So I'm out of them at the moment.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
LOL was just kidding....... saw ya posted that a couple of years ago.
Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.
Bookmarks