Results 1 to 11 of 11

Thread: Shackle bushings

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2009
    Location
    Sequim
    Posts
    2,117

    Shackle bushings

    Help.. I need to order shackle bushings and all I can find is complete shackle kits. I found a set from energy suspensions and it was wrong when I got it?? Any body have a part # for these or an idea where I can get some? Thanks Steve...

  2. #2
    I've always had good luck with ESPO:

    http://www.springsnthings.com

    Only drawback is you need to call or request a quote for pricing. Old Skool!

    Kenny Likins
    Ballard, Seattle, WA
    www.redfalken.com

    `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)

  3. #3
    Steve,

    What is the hole diameter you need? I have three new sets of bushings and one new shackle kit is with one of them. I know I need one set (I have not looked to see which yet), but the two loose sets I have one is smaller than the other. So you may get lucky if the size I don't need is the size you do need. Measure and let me know.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  4. #4
    Join Date
    Aug 2009
    Location
    Sequim
    Posts
    2,117
    Best measurements I have are: ID of shackle is just shy of 1.5" and over all length is right at 2". Hope that makes sense. I called energy suspension and they do not make one for the Falcons?? But I have there sizing chart, maybe something will fit if yours don't. Thanks

  5. #5
    What I need is to fit the new leaf springs I got. So I will shift some focus tonight when I get home to see what it is I have and what I need and will let you know if I have any leftovers..
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  6. #6
    Also - are the hanger brackets and the leaf eye the same inside diameter? I have to check this myself tonight... as a matter of fact.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Similar Threads

  1. Door hinge bushings
    By EdsFunny in forum Tech Talk
    Replies: 4
    Last Post: January 7th, 2011, 06:33 PM
  2. leaf spring bushings..
    By Nathan289 in forum Tech Talk
    Replies: 0
    Last Post: May 17th, 2010, 10:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •