![]() |
|
#1
|
||||
|
||||
Best Penetrating Oil
I need to deal with some stuck exhaust bolts on one of my non-Falcon cars. Who is making the best penetrating oil these days?
__________________
Patrick Brown 331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI |
#2
|
||||
|
||||
I've had good luck with freeze off, pb blaster, and deep creep.
Wd40 has some new specialist series that I wouldn't mind trying. There is another brand deeze nutz or something like that I wouldn't mind getting just for the name. Spray and let soak.. tap with hammer spray some more. Usually works for me
__________________
Nathan and Jen Cooper 63 Sprint Hardtop "Dollora" 63 Super deluxe squire wagon "Mayble" * this spot is vacant for future project* |
#3
|
||||
|
||||
I'm a big fan of that Deep Creep by Sea Foam. Maybe it's just the bubbling action but it seems to really get absorbed into the cracks and crevices.
__________________
Kenny Likins Ballard, Seattle, WA www.redfalken.com `62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV) |
#4
|
||||
|
||||
I used Kroil for ever and never broke a bolt, but last time I went to pick up a can at Tacoma Screw (the rusty screw replacement experts) they had another brand they suggested I try. So far so good with it as well, though I can't recall the name. It was less expensive than Kroil too.
__________________
Roger Moore 63 "Flarechero" powered by: '65 289-V8 | T5 | 8" TracLoc rear |
#5
|
||||
|
||||
I use Free-All and PB Blatser booth do well.
__________________
63 Sedan Delivery 5.0 HO EFI AOD 8" rear |
#6
|
||||
|
||||
I thought roger just
![]()
__________________
Nathan and Jen Cooper 63 Sprint Hardtop "Dollora" 63 Super deluxe squire wagon "Mayble" * this spot is vacant for future project* |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|