Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > Classified > Cars and Parts For Sale or Trade

Reply
 
Thread Tools Display Modes
  #1  
Old October 22nd, 2017, 06:45 AM
Ric Ric is offline
New Forum User
 
Join Date: Feb 2017
Location: redmond
Posts: 40
carb work

I need to find a good carburetor person. Any suggestions ?
Reply With Quote
  #2  
Old October 24th, 2017, 11:07 AM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Seattle
Posts: 4,455
What kind of carburetor and what kind of work does it need? I've been known to fix 1 or few hundred of them.
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #3  
Old October 25th, 2017, 07:48 AM
Ric Ric is offline
New Forum User
 
Join Date: Feb 2017
Location: redmond
Posts: 40
carb work

200 6 cyl engine with holey carb. Runs very rough when cold better when warm but still crappy. Misses and sputters on slow climb like my driveway . Very good compression , electronic ignition , new plugs and wires , fuel pump , filter , Wife says it pings when I get into the gas but I am almost deaf and don't hear it.
Fell free to call me

Last edited by Luva65wagon; October 27th, 2017 at 05:52 PM. Reason: Removed phone number for security reasons...
Reply With Quote
  #4  
Old October 26th, 2017, 09:38 AM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Seattle
Posts: 4,455
Ric, I'll give you a call Friday when I'm available next.

I assume you've checked timing on this as well? Pinging, if it is happening, would point to timing being too far advanced. Also, the Carb would need to have the spark control vacuum source. All stuff to check while you're at it.

The Holley 1 barrel is notorious for having issues due to warping. Actually, most 60 y.o. carburetors are pretty tweaked by now. I've been able to work past some of these issues before, but some I've seen are a too far gone. In these cases you'll need to be prepared for plan "b".

Will touch base tomorrow.

Roger
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #5  
Old October 28th, 2017, 06:39 AM
Ric Ric is offline
New Forum User
 
Join Date: Feb 2017
Location: redmond
Posts: 40
Smile carb work

Thanks for calling I will check my voltage today and the timing too. I am looking forward to getting it over to you and having you help troubleshoot my issues.
Thanks again
Ric
Reply With Quote
  #6  
Old October 30th, 2017, 12:32 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Seattle
Posts: 4,455
No worries Ric. I'll text you over my address this week so you will have it.
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #7  
Old November 3rd, 2017, 11:52 AM
Ric Ric is offline
New Forum User
 
Join Date: Feb 2017
Location: redmond
Posts: 40
carb work

LOL well I figured out that I am getting 9 v to my ignition but can't figure out which is the pink wire. Good grief
Ric
Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Welding Work BPVan Local Resources 9 May 3rd, 2011 09:55 PM
Would this work on a round body? BillP 98201 Tech Talk 2 January 13th, 2009 09:17 AM
Out of work and need to sell Dick A Mckinley Cars and Parts For Sale or Trade 0 October 22nd, 2008 12:16 PM
Body work BadBird Tech Talk 5 December 2nd, 2007 11:53 AM
Custom Work pbrown Show Off Your Ride 27 July 8th, 2007 02:07 AM


All times are GMT -7. The time now is 09:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.