Results 1 to 15 of 87

Thread: Old Car Safety

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Dennis,

    I figured you would have needed it to angle-up to clear the other belt to also allow turning it around. If you can get the angled one, I would.

    I doubt they would harden the bracket (much) and it would bend. I also doubt they expected the pull would be in that orientation and never tested for this configuration.

    No bench vice! I got one or two extra I could send you...
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  2. #2
    Join Date
    Jul 2013
    Location
    Federal Way
    Posts
    906
    Dennis, I have been looking at those. Tiresall.com has them for $69.
    http://www.tiresall.com/Milestar-MS7...S-WW-A-S/1392/
    I see now why you want bigger for your car.
    Don Bartlett
    Federal Way, WA
    61 Four Door Sedan
    144-6, 3 on the tree



  3. #3

    Milestar

    Quote Originally Posted by dhbfaster View Post
    Dennis, I have been looking at those. Tiresall.com has them for $69
    That's a good price. I paid $79.95 each about three and a half years ago. They have 1/2-inch wide whitewalls:

    Wimpy Lane.jpg

    I have 13,500 miles on the Milestars now and would like to put at least 25,000 on them before getting a new set of Maxxis tires.
    Last edited by ew1usnr; February 3rd, 2016 at 08:29 PM.
    Dennis Pierson
    Tampa, FL
    "The Wonder Falcon"

    '63 Futura Hardtop (260, Ford-O-Matic, bench seat)

  4. #4

    Brackets and vices

    Quote Originally Posted by Luva65wagon View Post
    I figured you would have needed it to angle-up to clear the other belt to also allow turning it around. If you can get the angled one, I would.
    Hello, Roger.

    This is my e-mail exchange with Race Ready Products:

    "The picture shows three different brackets with the part number 11549.
    When placing an order, how do I specify that I want the angled on the right?
    Thanks, Dennis."

    "The bracket we can get now looks a little different. Michael Ceniceros"
    Agled Bracket.png

    "That will work. What part number do I use to order it? Thanks, Dennis."

    "We do not have the number on our site just yet. You can call us to place an order. These ends are same price as the others, $10 pair. Thank you,
    -Mike."

    Quote Originally Posted by Luva65wagon View Post
    No bench vice! I got one or two extra I could send you...
    I don't have a work bench either! It's a problem. I usually turn a garbage can upside down and that is my work surface.
    Last edited by ew1usnr; February 4th, 2016 at 05:47 PM.
    Dennis Pierson
    Tampa, FL
    "The Wonder Falcon"

    '63 Futura Hardtop (260, Ford-O-Matic, bench seat)

Similar Threads

  1. Where is the Neutral Safety Switch?
    By ew1usnr in forum Tech Talk
    Replies: 9
    Last Post: May 12th, 2013, 06:31 AM
  2. 66' Falcon neutral safety switch?
    By Unregistered in forum Parts Wanted
    Replies: 3
    Last Post: September 4th, 2008, 07:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •