Results 1 to 2 of 2

Thread: cams

  1. #1

    cams

    Hello Patrick, what kind of cam do you have in your motor? roller or flat tappet, duration and the .050 spec. and lift. comp cams say there is a difference between a carb & a EFI cam. do you think there is? thanks jh

  2. #2
    I have a roller Isky cam in there now. I'll probably change back to my Comp Cams roller cam at some point. The Comp Cams cam is a 280H (part number 31-226-3) and has this description.

    Hydraulic-Broad power. 2500 stall, low gears, 9.5:1 compression and headers. Rough idle.
    Specs:
    http://www.compcams.com/Company/CC/c...?csid=794&sb=0


    The Isky cam is not as aggressive. I have to look up the specs. I don't recommend this one.
    Patrick Brown
    331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •