Results 1 to 9 of 9

Thread: 4 lug rear axle for a 65 Ranchero

  1. #1

    4 lug rear axle for a 65 Ranchero

    I need a 4 lug rear axle for a 65 Ranchero mine is dieing. Anyone in the Seattle, Tacoma, Olympia have one.
    Olgraybeard


  2. #2
    I just pulled a 7.25" 4-lugger from the Ranchero. It is the same if you still have that style rear-end. It is yours if you want it.

    I don't know the condition, but it got the car from Sequim to Lynnwood.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  3. #3
    Yes, I want it. My Email is mail1948@yahoo.com maybe I can pick it up this Sunday?
    Olgraybeard


  4. #4
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,430
    Is the '63 same width as the '65?

    Maybe you will have more room for wider tires.

  5. #5
    I hope the perches are the same distance, so I don't have to move them, but not the end of the world if they aren't
    Olgraybeard


  6. #6
    I am pretty certain all 60-65 Falcons have the same width. Backing plate to backing plate may vary though. I'll measure the 65 V-8 rearend I'm putting in to compare it to the one I took out. If you want to measure backing plate to backing plate on yours, you can post it or call me before driving out here.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  7. #7
    I'm not really concerned I have room around my tires and spring perches would be just a little more work but it would be nice to know. It would be a bonus if the axle ratio is in the low 3's rather than the 3:50 I have. See you Sunday.
    Olgraybeard


  8. #8
    I suspect all these 7.25 rear have the 3.50 gearing. I'm sure it is exactly what you have now. It's free, it will keep you going, and then you can start keeping an eye out for an 8" 4 lug from a Maverick, which is what Kenny and I both have in our other cars. They're getting rare, but they pop-up once in a while. And they are always 2.79 gear.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  9. #9
    Perch to Perch is 43.5 and from the back of the upper brake-shoe pivot boss (upper part of the backing plate just above the bolts holding the wheel cylinder) is 50.5 between here.

    Hope this heps.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Similar Threads

  1. Eight inch rear axle
    By doghows in forum Tech Talk
    Replies: 10
    Last Post: February 12th, 2011, 05:39 PM
  2. Ranchero rear frame rail
    By InkedForLife in forum Cars and Parts For Sale or Trade
    Replies: 0
    Last Post: January 27th, 2010, 06:53 PM
  3. Rear End Gears Needed 61 Ranchero
    By 61RANCHERO in forum Parts Wanted
    Replies: 4
    Last Post: December 22nd, 2008, 07:10 PM
  4. 65 Ranchero rear rock sheild
    By SmithKid in forum Tech Talk
    Replies: 2
    Last Post: October 29th, 2008, 04:05 PM
  5. 63 Ranchero Rear Floor Pan (Under Bed)
    By rrise in forum Tech Talk
    Replies: 2
    Last Post: December 13th, 2007, 08:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •