Looking for a repair shop in central Florida

[Soft Taco 84]

Now that the falcon runs great, the next order of business is the transmission. It's a 4 speed manual that chatters and it also leaks pretty bad so I always have to top it off. I'm looking for a repair shop in central Florida to handle it. I live in Sanford specifically but If I can find a shop here or even lake Mary, longwood, Orlando or apopka that would be great. Thanks for any suggestions!

[Luva65wagon]

What type of 4-speed is in this? What engine?

If this is the 6-cyl English 4-speed (Dagenham) the shaft seals for this, and gaskets, are a hard find. Ask me how I know. Most shops can do very little with these because parts are so hard to find. I've seen a gasket kit, I think, on eBay, but they wanted more than I wanted to pay, so I made my own gaskets, which is easy to do. The shaft seals I addressed by sandwiching an o-ring between the seal and the shift lever before bolting those back on. There is a tail-shaft seal you can still get, but that is the only easy item to find on these. They are made of unobtainium. I had to buy 5 or 6 of these to get enough good parts to build one good transmission, though I probably have enough parts to build another. Once I sell my wagon, which has this transmission, these spare parts are going on eBay to pay for all of my future projects combined.

If a V8 4-speed you are in better luck and most good transmission shops in your area can deal with these. Parts are more plentiful. Maybe Dennis, who lives in Florida, knows a good transmission shop. Otherwise ask around some of the local car clubs, since they usually know who (locally) to use and who to avoid.

[Soft Taco 84]

Yep, it's the dagenham

[R33d]

Got any other recommendations?

[Luva65wagon]

Buy low, sell high... that's always a good recommendation.