Results 1 to 6 of 6

Thread: Free headliner,hinge pin bushing set,molding clips

  1. #1
    Join Date
    Nov 2013
    Location
    Tillamook
    Posts
    46

    Free headliner,hinge pin bushing set,molding clips

    The members of this forum have been good to me when it came to asking for parts so I thought I could possible repay the good deeds by offering these parts to someone that can use them, we all know that it is expensive to build a car.

    I have a brand new headliner that is black in color that was supposed to fit a 60-65 Falcon 2 door wagon (probably a 4 door as well) but the bows were not in the correct place for my car so I figure it may be correct for a 60-63 wagon. Here are the measurements from the back to the front of the bow centerlines so you can measure your car and see if it will work for you.

    First bow from back of car is 14"-12 1/2"-13"-13"-13 1/2"-13 1/2"-9 1/4"
    7 bows total I did put 2 cuts at the c pillar to get the headliner to wrap around pillar but they are not deep so should not affect fitment.

    Also have a new door hinge pin bushing set up--4 pins and 8 bushings

    A new rocker panel molding clip set 12 clips total the clips measure 2 3/8" x 1 1/4"

    I will have more free items as car gets nearer to completion.

    All I ask is for you to pay shipping of $15.00 for headliner and a couple dollars each for the other items.

    Mike

  2. #2
    Join Date
    Nov 2010
    Location
    Seattle
    Posts
    300
    I'll need to check but if the hinge pins fit my van I may take you up on those.
    Brian
    '67 Falcon Bus/240/C4/Offy DP/MSD Duraspark II/Holley 4160

  3. #3
    Join Date
    Nov 2013
    Location
    Tillamook
    Posts
    46
    The pin appears to be 3/8" diameter and 2 1/2" long

  4. #4
    Any part numbers on the box for the headliner?
    Nathan and Jen Cooper
    63 Sprint Hardtop "Dollora"
    63 Super deluxe squire wagon "Mayble"
    * this spot is vacant for future project*

  5. #5
    Join Date
    Nov 2013
    Location
    Tillamook
    Posts
    46
    No part numbers on the box for headliner, it was just one I bought off of ebay from seller classicautotrimnv

    http://www.ebay.com/itm/1960-1961-19...af7846&vxp=mtr

  6. #6

    Falcon Headliner

    Mike if you still have the headliner that will fit a 62 door wagon, I need one. and the front 3 bows. please contact me at rtreyno@yahoo.com
    RT

Similar Threads

  1. Door hinge spring compressor
    By ew1usnr in forum Tech Talk
    Replies: 11
    Last Post: April 23rd, 2014, 06:07 PM
  2. New Headliner
    By 64SprintV8 in forum Chit Chat
    Replies: 4
    Last Post: November 22nd, 2011, 01:45 PM
  3. Door hinge bushings
    By EdsFunny in forum Tech Talk
    Replies: 4
    Last Post: January 7th, 2011, 06:33 PM
  4. Headliner
    By BadBird in forum Tech Talk
    Replies: 8
    Last Post: June 16th, 2010, 09:29 AM
  5. How to crush a new bushing?
    By Paully in forum Tech Talk
    Replies: 2
    Last Post: June 11th, 2009, 01:07 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •