Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > General Forums > Chit Chat

Reply
Thread Tools Display Modes
  #1  
Unread 05-28-2014, 07:45 PM
helomech's Avatar
helomech helomech is online now
New Forum User
 
Join Date: Apr 2014
Location: Puyallup
Posts: 29
Messy Garage... I almost see floor!

So shortly after buying the current project, I had to fly to CA to pack up my house down there and move everything up here to the new place.

I KNOW we donated, gave away, sold and yard sale'd a BUNCH of stuff. Why there's still SOOO MUCH STUFF that came with us, I just don't know. Add to that, the different layout of this new place, certain things just don't fit, etc. So the garage became the mecca for boxes o' stuff.

My sister owns an auction house, so I've been trying to dump as much stuff in to boxes that I can drop off with her. I've made it to where I can see FLOOR in the garage. Several boxes in there actually say GARAGE on them... This must mean I'm getting close. Almost time to hit up Lowes for some garage shelving so I can get somewhat organized in there.

The movers did a FAN TAS TIC job on moving my things. They snapped the drain pipe/valve off the bottom of my compressor. I think I have enough space to get an ez-out in there to remove the piece of tubing that still in there. My media blast cabinet showed up EMPTY? But the drain door is closed... hm, weird. ok, so... here's the part that really got me. The FIRST thing I see when they open the side doors on the semi trailer... My stacked, rollaway toolbox... lying facedown, down a step. I locked the drawers and shrink wrapped this thing and they still had the drawers open up with tools falling out. For lack of better words and to hide my true feelings, the "genius" driver had the "brilliant" idea to just roll the thing up on it's top, then over to its wheels. Yeah, good luck with that Pal. I bet you can't even budge it. I removed the brackets that hold the top box in place, set it upright. They dollied that over to the garage. Then I showed "genius" the wheels on the lower box... so we stood it up and rolled it to the garage. Set the top box on, reattach brackets, etc. The box made it with minor dents to the lid. It took some serious drawer shaking to get things to settle inside to where I could even open them. Now, I haven't been in it yet to fix everything. Now I used to be an aircraft mechanic. My toolbox is VERY organized... er... WAS... I'm sure it's going to take me the better part of 2 hours to go through and put things back where they belong.

Meh... let's see... where was I... Is anyone still reading this? lol.

Long story, sh, well, long... once I can see floor and have shelves in place, I intend to pull the 302 and c4 out of the car so I can go through those, clean up the engine bay, cut out the rusted floors and weld in the new panels I bought... Then... What SEATS do I put in? There are currently NO seats. I read somewhere about a truck seat of some sort that fits in the rear area without too much modification. What about front seats? I prefer buckets. Not opposed to the foxbody mustang GT seats, though I'm getting older and comfy is a good thing.

This will just be an around town car. Local shows. Highway worthy to make trips down to Portland, etc. So no plastic race seats.

On a side note, I have what looks like a 65-66 mustang rear seat that came in this car. It's red (hate red interior). It's actually in really good shape if anyone knows of anybody needing a rear for their mustang.
Anyway... if you're still here, thanks for letting me ramble. Can't wait to actually get things organized, fixed and tools touching Falcon...

Oh yeah, this is a '64 2-door post. V8 car. It seems to be sort of a Calico variety of colors. Mostly blue. Every car I've ever redone, I've put black carpet, seats, etc. into. This one has a blue dash in it and I sort of like it. Thinking I might actually redo the dash in blue, a dark blue carpet.. Maybe a black with blue or blue with black seats...

ok, I can now tell that the pain meds have me rammmmmmbling. This isn't a Nash site... so, Adieu!
Reply With Quote
  #2  
Unread 05-28-2014, 08:34 PM
dhbfaster dhbfaster is online now
Senior Forum User
 
Join Date: Jul 2013
Location: Federal Way
Posts: 811
Reminds of my move to Washington...guy shows up with a half full semi (he needed an empty one) and says "Oh they WAY under quoted this job!" I'll let your imagination do the rest of the work on how it went from there!

Anyway...Welcome to the forum, and hopefully welcome to the club! When you get a chance, post some pics of your falcon- and your newly organized tool box. Hey, at least your stuff got here!
__________________
Don Bartlett
Federal Way, WA
61 Four Door Sedan
144-6, 3 on the tree


Reply With Quote
  #3  
Unread 05-28-2014, 08:43 PM
SmithKid's Avatar
SmithKid SmithKid is offline
Paid Chapter Member
 
Join Date: Feb 2007
Location: Everett
Posts: 926
Yup, welcome to the Forum. I echo Don's post regarding pics of your ride. We like 'em!

Sounds like you want to go with buckets, but in case you decide on a inexpensive alternative, I have a totally rebuilt and recovered seat from my Ranchero, in '65 two-tone blue in VERY good condition. Just want to get it out of my way and will let it go cheap. Pics on request (they're already on here somewhere, but I can't find them).
__________________


Gene Smith
Everett, WA
'65 Ranchero Deluxe
302, 4-Spd
Granada Discs
Reply With Quote
  #4  
Unread 05-28-2014, 11:04 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,419
Blog Entries: 4
uh humm...

http://www.rainierfalcons.com/forums...ead.php?t=2461

__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #5  
Unread 05-28-2014, 11:23 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,419
Blog Entries: 4
Quote:
Originally Posted by SmithKid View Post
Sounds like you want to go with buckets, but in case you decide on a inexpensive alternative, I have a totally rebuilt and recovered seat from my Ranchero, in '65 two-tone blue in VERY good condition. Just want to get it out of my way and will let it go cheap. Pics on request (they're already on here somewhere, but I can't find them).
http://www.rainierfalcons.com/forums...92&postcount=4
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #6  
Unread 05-29-2014, 10:09 AM
SmithKid's Avatar
SmithKid SmithKid is offline
Paid Chapter Member
 
Join Date: Feb 2007
Location: Everett
Posts: 926
Roger, how'd you find that link? I think I need some more schooling.
__________________


Gene Smith
Everett, WA
'65 Ranchero Deluxe
302, 4-Spd
Granada Discs
Reply With Quote
  #7  
Unread 05-29-2014, 12:05 PM
doghows's Avatar
doghows doghows is offline
Senior Forum User
 
Join Date: Aug 2009
Location: Sequim
Posts: 2,112
You and me both Gene. I usually end up mentioning something and one of the computer savy members post up the link. I can never find anything either.

Oh yeah glad your almost ready to really start working on that falcon hope to see you at some of the events, with or without car !!
__________________
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Reply With Quote
  #8  
Unread 05-29-2014, 12:31 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
 
Join Date: Oct 2006
Location: Lynnwood
Posts: 4,419
Blog Entries: 4
I'm just gooder at it.
__________________
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear


Reply With Quote
  #9  
Unread 05-29-2014, 01:15 PM
SmithKid's Avatar
SmithKid SmithKid is offline
Paid Chapter Member
 
Join Date: Feb 2007
Location: Everett
Posts: 926
I'll agree to that. Even your language skills are gooder and gooder all the time. Now how about the schooling? How about a new thread just for that purpose.
__________________


Gene Smith
Everett, WA
'65 Ranchero Deluxe
302, 4-Spd
Granada Discs
Reply With Quote
  #10  
Unread 06-16-2014, 07:04 PM
helomech's Avatar
helomech helomech is online now
New Forum User
 
Join Date: Apr 2014
Location: Puyallup
Posts: 29
Well, time has flown by. With the exception of an excess of still not yet unloaded boxes in the garage, the move is done. I loaned out my trailer and just got it back today. Now I should be able to shove a bunch of loaded boxes and small furniture in there so I can A: get it out of my garage and 2: drop it off at the auction house.

The GF is away for the next three weeks. Perhaps this Friday is the day I start cutting away at the floor panel rust. With the car buried under tarps, blankets, small boxes, etc., it's been tough to get going on it.

I just ordered door and ignition lock sets, ignition switch bezel, gas pedal, trunk lock and a carpet kit. Figure I might as well start building the parts closet up. With any luck, I'll pull the engine and trans out this weekend and dump a couple gallons of paint stripper on that raspberry colored underhood paint. I'll just shoot it back to a satin black. Easy Peasy.

I've seen there's a place over in Tacoma that does a .302 for about $1300 with a core exchange. Hot tanked, honed, yada yada with a 12 mo warranty. Does this sound reasonable? I'm not really edumacated on the whole engine rebuilding thing. So unless someone local is willing to visit once I get the thing on the stand, I assume I'll just swap it out for a rebuilt with a warranty.

RB
Reply With Quote
  #11  
Unread 06-28-2014, 05:23 PM
helomech's Avatar
helomech helomech is online now
New Forum User
 
Join Date: Apr 2014
Location: Puyallup
Posts: 29
Super deluxe, high quality Harbor Freight leveler showed up this morning via FedEx. Opted to just pull the engine for now. Leveler seems like it would work better with longer chains, or no intake. Or, someone who knew what they were doing with it. lol.

Tq converter only had one nut out of the four studs. Everything is pretty clean. Oil in the engine oil filter was clean as coming out of a new bottle. I'm 95% certain the person was putting this thing back together when they passed away.



Reply With Quote
  #12  
Unread 06-28-2014, 05:40 PM
Nathan289's Avatar
Nathan289 Nathan289 is online now
Moderator
 
Join Date: Oct 2006
Location: Deer Park
Posts: 1,100
Blog Entries: 1
Sure looks like a new torque converter to me.
__________________
Nathan and Jen Cooper
63 Sprint Hardtop "Dollora"
63 Super deluxe squire wagon "Mayble"
* this spot is vacant for future project*
Reply With Quote
  #13  
Unread 06-28-2014, 08:58 PM
EdsFunny's Avatar
EdsFunny EdsFunny is online now
Active Forum User
 
Join Date: Nov 2010
Location: Port Townsend / world
Posts: 98
Blog Entries: 1
Good that the car is getting some love. I'm pretty certain I'll be in the middle of a project when I pass way, too.
__________________
If it's running, take it apart and see why.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ghetto Garage Jeff W Chit Chat 3 07-28-2012 09:14 AM
Ghetto garage Luva65wagon Chit Chat 8 11-02-2011 09:57 PM
Floor Pans doghows Parts Wanted 0 04-23-2010 08:37 AM
floor panels compact75 Tech Talk 3 10-04-2009 01:46 PM
rainy days= garage time falcon cobra Chit Chat 4 04-06-2009 08:25 AM


All times are GMT -7. The time now is 03:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.