Results 1 to 2 of 2

Thread: 64 Ranchero Bumpers & Bed stainless trim

  1. #1

    64 Ranchero Bumpers & Bed stainless trim

    Was hoping someone may have a set of driver quality bumpers for my 64 Ranchero. Mine are pretty straight, but the car had sat out for years before I bought it and the chrome has started to peel off. I've considered blasting them and then powder coating, But I don't know if I want to spend the money right now. And re-chroming is just to expensive these days. Also I need the two small Stainless pieces from each side where the bed meets the roof pillar. Where the rear window trim meets the bed trim each side, L-angle that covers the seam. Thanks, Jeff

  2. #2
    At the spring swap meets you'll find a lot of bumper vendors and most always have Falcon bumpers. Roughly $250-300 each and they'll buy your cores for $25 ea.

    Those little transition bed pieces are hard to find in good shape. Most of us have been keeping an eye out for them for a while. I used to have a couple really bad ones, but I think they went last year.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Similar Threads

  1. Interior Trim Panel Stainless Moldings
    By fecarman in forum Parts Wanted
    Replies: 2
    Last Post: November 9th, 2014, 06:06 PM
  2. Stainless Headers for the Straight Six
    By redfalken in forum Tech Talk
    Replies: 3
    Last Post: August 30th, 2014, 10:13 AM
  3. Bumpers ?
    By falcon cobra in forum Tech Talk
    Replies: 2
    Last Post: September 4th, 2013, 05:25 PM
  4. Bumpers
    By doghows in forum Chit Chat
    Replies: 4
    Last Post: July 4th, 2013, 02:56 PM
  5. bumpers
    By dennisnolton in forum Cars and Parts For Sale or Trade
    Replies: 0
    Last Post: June 6th, 2010, 02:00 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •