Results 1 to 4 of 4

Thread: Trunk accessory box.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Trunk accessory box.

    Some of you might have had a problem with things rolling around in your trunk. My solution might not be especially amazing, but it works nicely.

    I found that a strawberry box fits perfectly between the wheel well and the back of the trunk. These boxes are called "flats" and are made of heavy cardboard. They are used to hold quarts of fresh strawberries and you can get them for free from the produce section of your grocery store. It holds my scissor jack, fire extinguisher, a small tool kit, and a other few odds and ends.

    2-DCP_5982.JPG

    The box would slide around across the trunk, though, when making turns. I used scissors and cut a strip of aluminum from an old license plate and bent it into an N-shaped bracket. Then I used pliers and crimped one end to the box and the other end around a magnet. I had first wrapped a piece of duct tape around the magnet so that it could be gripped better and not slide as easily out of the aluminum bracket. You can buy magnets at Home Depot or off E-bay.

    1-DCP_5981.JPG

    The magnet attached itself to the inner fender with a "thunk" and it holds the box securely in place.

    4-DCP_5984.JPG

    Notice the squirt bottle. That is for if I need to clean the windshield since "The Wonder Falcon" does not have the windshield washer option.
    Last edited by ew1usnr; November 7th, 2014 at 12:14 PM.
    Dennis Pierson
    Tampa, FL
    "The Wonder Falcon"

    '63 Futura Hardtop (260, Ford-O-Matic, bench seat)

Similar Threads

  1. In Trunk Gas Filler
    By BadBird in forum Tech Talk
    Replies: 1
    Last Post: May 14th, 2013, 05:26 PM
  2. 67 trunk help
    By 63dreama in forum Tech Talk
    Replies: 1
    Last Post: June 3rd, 2012, 06:15 PM
  3. 62 Trunk Lid
    By pbrown in forum Cars and Parts For Sale or Trade
    Replies: 0
    Last Post: September 30th, 2008, 05:39 PM
  4. Need trunk lid for a '68 2 dr
    By 68FalconSC in forum Parts Wanted
    Replies: 0
    Last Post: July 5th, 2008, 08:38 PM
  5. Looking for a 62 Trunk Lid
    By pbrown in forum Parts Wanted
    Replies: 0
    Last Post: February 12th, 2007, 09:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •