Anyone running a rear sway bar? If so where did you get it, what size is it, and how big is your front sway bar?
Thank you.
Anyone running a rear sway bar? If so where did you get it, what size is it, and how big is your front sway bar?
Thank you.
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
I have the Addco model 914 rear sway bar. It's 3/4". I have a 1" up front.
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
Summit Racing has it.
http://www.summitracing.com/parts/aco-914
Patrick Brown
331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI
Awesome thanks Patrick. Did it install easily? I guess I need to upgrade the front at the same time so I don't get a push through the corners.
63 Sedan Delivery
5.0 HO EFI AOD 8" rear
Hey steve whats with the need for the rear bar? are you going to go on a sports car track with your delievery? just wondering.. I still have the 6 cyl 3/4 " bar on the front of my falcon and it does the job, how fast must one go around a corner before the ditch fills the radiator....jh
I don't think Falcons came with anything different 6'r or V8. 5/8" I think.
I do know that a wagon has a lot more swing and roll than a car does and I put a 1" PST bar in my wagon right away. Before, going around even a freeway round-about wanted to flip me off into the ditch. After the 1" bar... flat as a pancake (almost) going around those curves.
So I'd always recommend a bigger front, and if that isn't enough then add the rear.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Bookmarks