Rainier Falcons > The FalconForum  

Go Back   Rainier Falcons > The FalconForum > Classified > Parts Wanted

Thread Tools Display Modes
Old March 13th, 2011, 09:52 AM
2erobrd's Avatar
2erobrd 2erobrd is offline
Active Forum User
Join Date: Apr 2010
Location: Valencia
Posts: 51
LOOKING FOR - 4 bolt 15" wheels

We are in the final stages of a rotiserie restoration, along the way we upgraded the front brakes to power disc brakes. Now we want to give the full wheel-well look without going too big, so I think 15" wheels would look great, but I am having a tough time finding a 15" with a 4 bolt pattern.

Does anyone have any suggestions other than going to a new rear end and new front spindles?

Reply With Quote
Old March 13th, 2011, 12:19 PM
Luva65wagon's Avatar
Luva65wagon Luva65wagon is offline
Chapter President
Join Date: Oct 2006
Location: Seattle
Posts: 4,462
I don't think they made them from Ford, did they? You'll probably only find 14" stock.

Contact Stockton Wheel - they can make anything, almost.
Roger Moore

63 "Flarechero"
powered by: '65 289-V8 | T5 | 8" TracLoc rear

Reply With Quote
Old March 13th, 2011, 01:45 PM
redfalken's Avatar
redfalken redfalken is offline
Join Date: Sep 2006
Location: Seattle
Posts: 1,612
I think you're right. I've only seen 14" four-lug. There are different versions that take either a small or large wheel cover. That allows for more room on the inside to convert to disk brakes.

They also make some adapters but I don't know if they'll work in this particular instance. Also, I would do a lot of research on the safety of these. They may have gotten better with more modern material but they used to be a little sketchy and prone to breaking at high speeds. Probably not fun!

Kenny Likins
Ballard, Seattle, WA

`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Reply With Quote
Old March 13th, 2011, 03:48 PM
2erobrd's Avatar
2erobrd 2erobrd is offline
Active Forum User
Join Date: Apr 2010
Location: Valencia
Posts: 51
Been checking around an no one seems to recomend the wheel adaptors, and top it off when you do find them they want almost as much as each wheel.

I have located a couple places that do have something similar to the steel wheels for a reasonable price, right around $100 each wheel, not bad considering these will just bolt up.

Question is do I need to get a specific off-set since I went discs in the front?

If so, how to I calculate it?
Reply With Quote
Old April 6th, 2011, 11:56 AM
61ranch 61ranch is offline
Active Forum User
Join Date: Oct 2006
Location: Eagle Point OR
Posts: 55
I bought some 15" wheels for mine and they fit nicely. I ordered them in a 15x6 (cant remember the offset but I will see if I can measure soon for you) from Early Wheel Company in Morro Bay California. I also ordered the 40 Ford hubcaps for them due to preference however the old dog dish falcon caps from my 61 fit on them if you go that route.
No matter where you go, there you are...
Reply With Quote
Old April 9th, 2011, 06:00 PM
dibbs66 dibbs66 is offline
New Forum User
Join Date: Aug 2010
Posts: 7
i hve disc brakes on the front of my 65 falcon and am running 14's with the use of a very thin spacer behind the front wheels havent had any probs they fit between the hub and the wheel but have been told the thin ones are not too bad hope this helps
Reply With Quote



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
15" wheels InkedForLife Parts Wanted 3 January 26th, 2010 12:01 AM
4 14" Ford Ralley Style Wheels New $350.00 Michael HAll Cars and Parts For Sale or Trade 0 November 28th, 2009 12:01 AM
Ford 5 lug Wheels and 14" Tires Hal Cogburn Cars and Parts For Sale or Trade 0 June 30th, 2007 09:36 AM
14" Tires and Wheels Hal Cogburn Advertised For Sale 0 May 27th, 2007 12:52 PM

All times are GMT -7. The time now is 06:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.